Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
1999 K2 Zed X
Original specifications: Shimano Deore LX · 9-speed · mechanical rear derailleur · 26" wheels.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #82274- Model year
- 1999
- Category
- Mountain
- Original MSRP
- $899.00
- Sizes
- L, M, S, way big
- Colors
- Chrome Silver
- In this record
- 27 specifications · original MSRP
Model history 1 other year
Browse other years
Compare side by side
Identification clues
1999 archived details
- Published colors
- Chrome Silver
- Frame
- K2 7005
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildK2 7005 · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | K2 7005 |
| Fork | K2 Smart Fork, 3.0" travel |
| Fork Material | Aluminum/magnesium, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano Alivio RapidFire SL |
| Front Derailleur | Shimano Deore LX, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Deore LX |
| Crankset | Shimano Deore LX, 22/32/44 teeth |
| Bottom Bracket | Shimano, 110mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 9-speed, 11 - 32 teeth |
| Chain | Shimano CN-HG72, 1/2 x 3/32" |
| Pedals | K2 clipless |
Brakes
| Brakes | Tektro linear-pull brakes, Tektro levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tange-Seiki Aheadset |
|---|---|
| Handlebar | K2 butted alloy |
| Handlebar Extensions | TIG alloy |
| Stem | K2 TIG alloy |
| Saddle | SDG Belair B17 |
| Seatpost | K2 alloy, 27.2mm diameter |
Wheels & Tires
| Hubs | Shimano Deore LX |
|---|---|
| Rims | Weinmann Zac 19, 32-hole |
| Spokes | Marwi stainless steel, 1.8mm straight gauge |
| Spoke Nipples | Alloy nipples |
| Front Tire | 26 x 2.10" Kenda Kinetic |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
27.2mm diameter
More parts (6)Fewer parts
Tektro levers
22/32/44 teeth
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" Kenda Kinetic
- Drivetrain
- 9-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Shimano, 110mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: K2 Smart Fork, 3.0" travel · Aluminum/magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: K2 Smart Fork, 3.0" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano Alivio RapidFire SL · Front derailleur: Shimano Deore LX, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Deore LX · Crankset: Shimano Deore LX, 22/32/44 teeth · Bottom bracket: Shimano, 110mm spindle · Rear cogs: 9-speed, 11 - 32 teeth · Chain: Shimano CN-HG72, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro linear-pull brakes, Tektro levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Weinmann Zac 19, 32-hole · Hubs: Shimano Deore LX · Front tire: 26 x 2.10" Kenda Kinetic
Controls and contact points
Archived: Headset: 1 1/8" threadless Tange-Seiki Aheadset · Handlebar: K2 butted alloy · Stem: K2 TIG alloy · Seatpost: K2 alloy, 27.2mm diameter · Saddle: SDG Belair B17 · Pedals: K2 clipless
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
