Velopedia Bicycle Archive

2000 Jamis Bossy 20

Original specifications: 20" wheels.

Share owner experience

No archive photo is available for this record.

At a glance

Archive #90164

Model year: 2000
Category: Kids
Original MSRP: $150.00
Sizes: Girls 11"
Colors: Metallis Periwinkle, Rose Pedal Pink
In this record: 21 specifications · original MSRP

Model history 2 other years

Browse other years

Compare side by side

Identification clues

2000 archived details

Published colors: Metallis Periwinkle, Rose Pedal Pink
Frame: Hi-tensile steel, oversize
Original equipment: N/A

Clues, not proof of model year. Colors vary and components may have been replaced.

Original buildHi-tensile steel, oversize · 20" wheels

Manufacturer catalog

Published sizes and colors

1 size · 2 colors

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published sizes

Girls 11"

Published colors

Metallis PeriwinkleRose Pedal Pink

Frameset

Frame Construction	Pulse-welded
Frame Material	Hi-tensile steel, oversize
Fork	Jamis
Fork Material	Hi-tensile steel, unicrown crown

Drivetrain

Crankset	1-piece 5 1/2", 36 teeth
Bottom Bracket	One piece
BB Shell Width	American
Rear Cogs	1-speed, 18 teeth
Chain	KMC 410, 1/2 x 1/8"
Pedals	Wellgo resin

Cockpit & Contact Points

Headset	1" steel
Handlebar	Jamis Cruiser
Stem	Alloy 4 bolt
Saddle	Jamis Bossy Cruiser
Seatpost	Alloy, 25.4mm diameter

Wheels & Tires

Hubs	Front: aluminum, nutted, Rear: Shimano Coaster Brake
Rims	Weinmann 4019, 36-hole
Spokes	Stainless steel, 2.0mm straight gauge
Spoke Nipples	Brass nipples
Front Tire	20 x 2.125" Jamis Bossy Streat Tread
Wheel Size	20" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

Pedal cadence

RPM

Speed units

RPM = pedal turns per minute.

Published build36T · 18T · 1-speed

Ratio2.00:1

Estimated speed At 90 RPM Gear10.8 mph

Uses front tire 20×2.125; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Gears Drivetrain

Front teeth Smallest rear teeth Largest rear teeth

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Rear tire marking

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

Rim diameter (BSD, mm) Tire width (mm)

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Cadence (RPM) Speed units

Gear, dimension and cadence changes update results automatically.

Gearing comparison
Measure	Original	Your setup
Lowest ratio	—	—
Highest ratio	—	—
Total range	—	—
Lowest-gear speed	—	—
Highest-gear speed	—	—

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications

Front tire · Original

20 x 2.125" Jamis Bossy Streat Tread Replacement search: 20x2.125 bicycle tire Before ordering: Check rim type and tire clearance.

Search Amazon Search eBay

Seatpost · Original

Alloy

25.4mm diameter

Search Amazon Search eBay

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire: 20 x 2.125" Jamis Bossy Streat Tread
Drivetrain: 1-speed
Seatpost diameter: 25.4 mm
Bottom bracket / shell: One piece · American

Equipment inspection checks 9 checks based on 4 archived component groups Open equipment checksClose equipment checks

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Frame and fork

Inspect the frame and fork →

Archived: Frame: Pulse-welded · Fork: Jamis · Hi-tensile steel, unicrown crown

Check paint damage, vent holes and accessible internal surfaces for corrosion. Look for dents, bent tubes and cracking around welded or brazed joints.
Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Drivetrain

Check drivetrain wear →

Archived: Crankset: 1-piece 5 1/2", 36 teeth · Bottom bracket: One piece · Rear cogs: 1-speed, 18 teeth · Chain: KMC 410, 1/2 x 1/8"

Check chain tension and chainline, rotate the drivetrain through a full revolution and confirm the rear axle or tensioning hardware cannot slip.
Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Wheels and tires

Check wheels and tires →

Archived: Wheel size: 20" wheels · Rims: Weinmann 4019, 36-hole · Hubs: Front: aluminum, nutted, Rear: Shimano Coaster Brake · Front tire: 20 x 2.125" Jamis Bossy Streat Tread

Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.

Controls and contact points

Archived: Headset: 1" steel · Handlebar: Jamis Cruiser · Stem: Alloy 4 bolt · Seatpost: Alloy, 25.4mm diameter · Saddle: Jamis Bossy Cruiser · Pedals: Wellgo resin

Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Display name Required Email address Required · private Ownership Required When or how long you owned it Required Frame size Required Primary type of riding Required Rider height Optional

Overall owner experience Required · at least 120 characters0 of 120 minimum characters Would you own one again? Optional

Add fit, maintenance and buyer detailsOptional · five additional fields

Fit and sizing observations Optional Long-term strengths Optional Problems or recurring maintenance Optional Parts replaced or upgraded Optional What a used buyer should inspect Optional

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Search 2000 model Search all years

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

2000 Jamis Bossy 20