Uses front tire 700C×23; rear size isn’t listed.
Velopedia Bicycle Archive
2004 Iron Horse Intrepid
Original specifications: Campagnolo Veloce drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #31897- Model year
- 2004
- Category
- Road
- Original MSRP
- $1,899.99
- Sizes
- 52cm, 54cm, 56cm, 58cm, 61cm
- Colors
- Black
- Geometry
- Legacy reference
- In this record
- 25 specifications · archived image · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
2004 archived details
- Published colors
- Black
- Frame
- Aluminum
- Original equipment
- Campagnolo Veloce
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildAluminum · Campagnolo Veloce · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Aluminum |
| Fork | Columbus Carve |
| Fork Material | Carbon fiber composite w/aluminum steerer, aero crown |
Drivetrain
| Component Group | Campagnolo Veloce |
|---|---|
| Shifters | Campagnolo Veloce Ergo |
| Front Derailleur | Campagnolo Veloce |
| Rear Derailleur | Campagnolo Veloce |
| Crankset | FSA Gossamer, 39/53 teeth |
| Bottom Bracket | FSA Isis |
| BB Shell Width | 68mm English |
| Rear Cogs | 10-speed, 11 - 23 teeth |
| Chain | KMC X10, 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Campagnolo Mirage dual pivot brakes, Campagnolo Veloce Ergo levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" integrated FSA Orbit IS-2 |
|---|---|
| Handlebar | ITM Super Italian Pro 330 Over |
| Stem | ITM Forged Lite Luxe Over |
| Saddle | San Mercuri Fusion II |
| Seatpost | Carbon fiber, micro-adjust, 27.2mm diameter |
Wheels & Tires
| Hubs | Campagnolo Vento |
|---|---|
| Rims | Front: Campagnolo Vento, Rear: Campagnolo Vento G3, 28-hole |
| Spokes | Stainless steel, 14/15ga. (2.0/1.8mm) double-butted |
| Front Tire | 700 x 23c Hutchinson Fusion Comp |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 560 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 405 mm |
| Wheelbase | 980 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
micro-adjust, 27.2mm diameter
More parts (4)Fewer parts
39/53 teeth
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c Hutchinson Fusion Comp
- Drivetrain
- 10-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- FSA ISIS · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Columbus Carve · Carbon fiber composite w/aluminum steerer, aero crown
Drivetrain
Check drivetrain wear →Archived: Group: Campagnolo Veloce · Shifters: Campagnolo Veloce Ergo · Front derailleur: Campagnolo Veloce · Rear derailleur: Campagnolo Veloce · Crankset: FSA Gossamer, 39/53 teeth · Bottom bracket: FSA ISIS · Rear cogs: 10-speed, 11 - 23 teeth · Chain: KMC X10, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Campagnolo Mirage dual pivot brakes, Campagnolo Veloce Ergo levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Front: Campagnolo Vento, Rear: Campagnolo Vento G3, 28-hole · Hubs: Campagnolo Vento · Front tire: 700 x 23c Hutchinson Fusion Comp
Controls and contact points
Archived: Headset: 1 1/8" integrated FSA Orbit IS-2 · Handlebar: ITM Super Italian Pro 330 Over · Stem: ITM Forged Lite Luxe Over · Seatpost: Carbon fiber, micro-adjust, 27.2mm diameter · Saddle: San Mercuri Fusion II · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




