Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
1998 Iron Horse ARS 2.0
Original specifications: Shimano Alivio · 7-speed · mechanical rear derailleur · 26" wheels · 25 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #78736- Model year
- 1998
- Category
- Mountain
- Original MSRP
- $399.95
- Sizes
- 15", 16.5", 19.5", 21"
- Colors
- Matte steel blue, Polished, Team Red/brushed silver
- Weight
- 25 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
1998 archived details
- Published colors
- Matte steel blue, Polished, Team Red/brushed silver
- Frame
- 6061 T6 aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061 T6 aluminum |
| Fork | Rock Shox Indy S |
| Fork Material | Aluminum/magnesium, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano Alivio RapidFire SL |
| Front Derailleur | Suntour FD-TP16, top-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano Alivio |
| Crankset | Shimano Alivio, 24/34/42 teeth |
| Bottom Bracket | Chin Haur CH-46, 112mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | KMC Z-51, 1/2 x 3/32" |
| Pedals | Wellgo LU-933S |
Brakes
| Brakes | Vanguard linear-pull brakes, Vanguard aluminum levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless YST threadless |
|---|---|
| Handlebar | HL aluminum |
| Handlebar Extensions | Not included |
| Stem | Tahoma Sonne IV |
| Saddle | Iron Horse |
| Seatpost | Aluminum micro-adjust, 27.2mm diameter |
Wheels & Tires
| Hubs | Front: Joy Tech aluminum, Q/R, Rear: Shimano Alivio |
|---|---|
| Rims | Weinmann 4019, 36-hole |
| Spokes | Steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.10" Kenda K-877 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 584.2 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 431.8 mm |
| Wheelbase | 1066.8 mm |
| Fork offset / rake | 40.6 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
27.2mm diameter
More parts (5)Fewer parts
Vanguard aluminum levers
24/34/42 teeth
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" Kenda K-877
- Drivetrain
- 7-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Chin Haur CH-46, 112mm spindle · 68mm English
Equipment inspection checks 12 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Rock Shox Indy S · Aluminum/magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Rock Shox Indy S
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano Alivio RapidFire SL · Front derailleur: Suntour FD-TP16, top-pull/clamp-on 28.6mm · Rear derailleur: Shimano Alivio · Crankset: Shimano Alivio, 24/34/42 teeth · Bottom bracket: Chin Haur CH-46, 112mm spindle · Rear cogs: 7-speed, 11 - 28 teeth · Chain: KMC Z-51, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Vanguard linear-pull brakes, Vanguard aluminum levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Weinmann 4019, 36-hole · Hubs: Front: Joy Tech aluminum, Q/R, Rear: Shimano Alivio · Front tire: 26 x 2.10" Kenda K-877
Controls and contact points
Archived: Headset: 1 1/8" threadless YST threadless · Handlebar: HL aluminum · Stem: Tahoma Sonne IV · Seatpost: Aluminum micro-adjust, 27.2mm diameter · Saddle: Iron Horse · Pedals: Wellgo LU-933S
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




