Rear tire: 20×1.75.
Velopedia Bicycle Archive
1996 Iron Horse Typhoon
Original specifications: 20" wheels · 25.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #57533- Model year
- 1996
- Category
- BMX
- Original MSRP
- $299.95
- Sizes
- Boys 13"
- Colors
- Chrome-plated, Dark Blue
- Weight
- 25.5 lb
- In this record
- 22 specifications · original MSRP
Model history 2 other years
Browse other years
Compare side by side
Identification clues
1996 archived details
- Published colors
- Chrome-plated, Dark Blue
- Frame
- 4130 chromoly
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build4130 chromoly · 20" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | 4130 chromoly |
| Fork | Iron Horse |
| Fork Material | Chromoly, semi-sloping crown |
Drivetrain
| Crankset | Dotek 1-piece, 43 teeth |
|---|---|
| Bottom Bracket | One piece |
| BB Shell Width | 68mm Threadless |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC 410, 1/2 x 1/8" |
| Pedals | Wellgo LU-313 |
Brakes
| Brakes | Tektro RBP-867AG brakes, Tektro 363A levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Dia-Compe Aheadset MX |
|---|---|
| Handlebar | Iron Horse BMX chrome plated |
| Stem | Kalloy |
| Saddle | Velo BMX |
| Seatpost | Iron Horse chromoly, 22.2 mm (7/8 inch) diameter |
Wheels & Tires
| Rims | Alex VP-20, 36-hole |
|---|---|
| Spokes | Steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 2.125" Kenda K-50 Comp III type |
| Rear Tire | 20 x 1.75" Kenda K-50 Comp III type |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
More parts (2)Fewer parts
22.2 mm (7/8 inch) diameter
36-hole
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 2.125" Kenda K-50 Comp III type, Rear: 20 x 1.75" Kenda K-50 Comp III type
- Drivetrain
- 1-speed
- Seatpost diameter
- 22.2 mm
- Bottom bracket / shell
- One piece · 68mm Threadless
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Iron Horse · Chromoly, semi-sloping crown
Drivetrain
Check drivetrain wear →Archived: Crankset: Dotek 1-piece, 43 teeth · Bottom bracket: One piece · Rear cogs: 1-speed, 16 teeth · Chain: KMC 410, 1/2 x 1/8"
Brakes
Inspect the brakes →Archived: Brakes: Tektro RBP-867AG brakes, Tektro 363A levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: Alex VP-20, 36-hole · Front tire: Front: 20 x 2.125" Kenda K-50 Comp III type, Rear: 20 x 1.75" Kenda K-50 Comp III type
Controls and contact points
Archived: Headset: 1 1/8" threadless Dia-Compe Aheadset MX · Handlebar: Iron Horse BMX chrome plated · Stem: Kalloy · Seatpost: Iron Horse chromoly, 22.2 mm (7/8 inch) diameter · Saddle: Velo BMX · Pedals: Wellgo LU-313
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.