Velopedia Bicycle Archive
1997 Ibis Ti Mojo
Mountain bike, front suspension bicycle from the Velopedia specification archive.
- Original MSRP
- $5,550.00
- Sizes
- 12", 14", 15.5", 17", 18.5", 20"
- Colors
- Raw
- Weight
- 22.5
- Geometry
- Legacy reference · Ride analysis
- Archive ID
- 64814
Current market
Snapshot not yet availableProtected live updateReady after page interactionAutomated crawlers do not trigger marketplace requests.
Move, scroll, tap or type to start the protected update.
Velopedia analysis
What the specifications mean
Suspension is concentrated at the fork, so fork setup and rear-tire pressure are the main tools for balancing front and rear behavior. The 267% cassette range describes the available gearing more clearly than the component-group name alone. With rim brakes, the wheel’s braking surface is part of the system, so rim wear matters alongside pads and cables.
Suspension setup
Front only
Fork settings affect the front while rear-wheel behavior remains dependent on tire and wheel setup.
Gearing
267% cassette range
Calculated from the published 12–32-tooth sprocket span.
Brake service
Rim braking
Pad compound, cable condition and wheel braking-surface wear belong in the inspection.
Frame material
Titanium
Threaded interfaces still need correct anti-seize practice to reduce galling risk.
Used-bike inspection
If you’re buying this bike used
Before any test ride: both brakes should stop the bike firmly and release cleanly; both wheels should run true and be securely attached; tires should have no casing damage; and the headset, handlebar, stem, cranks and pedals should have no looseness or play.
Follow the full used-bike inspection order →- FrameCheck the welds for cracking and make sure the seatpost, bottom bracket and other threaded parts are not seized or galled in place.Inspect the frame and fork →
- BrakesInspect pad condition, cable movement and the rim sidewalls or brake tracks for wear. A concave or heavily worn braking surface can mean the wheel also needs replacement.Inspect the brakes →
- SuspensionAsk when the fork was last serviced. Check the stanchions for damage, look for oil at the seals and make sure the fork moves smoothly without bushing play.Evaluate the suspension →
- DrivetrainShift through every gear under light load and measure chain wear. Confirm that the shifter, derailleur, chain and cassette belong to the same 8-speed system.Check drivetrain wear →
- Wheels & tiresSpin both wheels and watch the rims for side-to-side or vertical movement. Check for dents, cracks, loose or uneven spokes and hub play, then inspect both tire casings for cuts, cracking or exposed threads.Check wheels and tires →
Bike-specific inspection checklist 20 checks based on 6 archived component groups Open checklistClose checklist
This checklist uses the archived equipment for this bike. It cannot confirm the condition, service history or later component changes of the example in front of you.
Identity and fit
Follow the full used-bike inspection order →Archived: 1997 Ibis Ti Mojo · Mountain bike, front suspension · Published sizes: 12", 14", 15.5", 17", 18.5", 20"
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Rock Shox Judy SL · Magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Rock Shox Judy SL
Drivetrain
Check drivetrain wear →Archived: Group: Shimano XTR 950 · Shifters: Shimano XTR RapidFire SL · Front derailleur: Shimano XTR top-swing, bottom-pull/clamp-on 31.8 mm · Rear derailleur: Shimano XTR SGS · Crankset: Shimano XTR M950-IG, 24/34/46 teeth · Bottom bracket: Shimano BB-M950, 112.5 mm spindle · Rear cogs: 8-speed, 12 - 32 teeth · Chain: Shimano CN-IG90, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano XTR V-Brake brakes, Shimano XTR levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Mavic 217 SUP, 32-hole · Hubs: Shimano XTR · Front tire: 26 x 2.10" WTB VelociRaptor kevlar
Controls and contact points
Archived: Headset: 1 1/8" threadless Chris King NoThreadSet · Handlebar: Ibis titanium · Stem: Ibis titanium · Seatpost: Syncros Hardcore aluminum, 28.6 mm diameter · Saddle: SDG 2000 Kevlar, titanium rails · Pedals: Not included
Before and during the test ride
Follow the full used-bike inspection order →Interpretation based on the archived manufacturer specifications. Confirm exact fit and standards before ordering parts or performing service.
Have you owned this bike?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Ibis Moron titanium tubing |
| Fork | Rock Shox Judy SL |
| Fork Material | Magnesium, triple-clamp crown |
| Rear Shock | N/A |
Drivetrain
| Component Group | Shimano XTR 950 |
|---|---|
| Shifters | Shimano XTR RapidFire SL |
| Front Derailleur | Shimano XTR top-swing, bottom-pull/clamp-on 31.8 mm |
| Rear Derailleur | Shimano XTR SGS |
| Crankset | Shimano XTR M950-IG, 24/34/46 teeth |
| Bottom Bracket | Shimano BB-M950, 112.5 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 12 - 32 teeth |
| Chain | Shimano CN-IG90, 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Shimano XTR V-Brake brakes, Shimano XTR levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Chris King NoThreadSet |
|---|---|
| Handlebar | Ibis titanium |
| Handlebar Extensions | Ibis Rosies |
| Stem | Ibis titanium |
| Saddle | SDG 2000 Kevlar, titanium rails |
| Seatpost | Syncros Hardcore aluminum, 28.6 mm diameter |
Wheels & Tires
| Hubs | Shimano XTR |
|---|---|
| Rims | Mavic 217 SUP, 32-hole |
| Spokes | Wheelsmith stainless steel, 1.8mm double butted |
| Spoke Nipples | Alloy nipples |
| Front Tire | 26 x 2.10" WTB VelociRaptor kevlar |
| Wheel Size | 26" wheels |
Historical reference geometry
Geometry
Historical model-level geometry recovered from Velopedia’s original archive database. The source does not identify which listed frame size this reference describes, so fit interpretation is intentionally limited and no size-normalized Archive Context is generated.
| Measurement | Legacy reference |
|---|---|
| Top tube | 577.9 mm |
| Head-tube angle | 71.5° |
| Seat-tube angle | 72° |
| Chainstay / rear center | 426.7 mm |
| Wheelbase | 1054.1 mm |
| Fork offset / rake | 40.6 mm |
Geometry source: Historical archive database — model-level reference geometry. The historical source provides one model-level geometry set and does not identify the corresponding frame size.
Geometry interpretation
What this geometry means
Legacy reference geometry
Fit reference
The historical source lists a 577.9 mm top-tube length, but it does not identify which frame size this model-level reference describes or whether the historical field was measured horizontally. Treat it as an archival frame reference rather than a size-specific fit recommendation. Its 72° seat-tube angle describes the reference frame’s seat-line orientation. Actual seated position still depends on frame size, saddle height and fore-aft adjustment.
Handling tendencies
The 71.5° head angle points to relatively quick-steering by current mountain-bike conventions steering geometry. Wheelbase is listed at 1054.1 mm, but because the historical source does not identify frame size, it is retained as a model reference rather than used for a size-normalized handling conclusion. Fork offset is listed at 40.6 mm. Offset works with head angle and wheel size to determine trail, so it is useful steering evidence even though the archive does not provide enough information here to calculate trail reliably.
Period context
At 71.5°, the head angle sits toward the steeper end among mountain geometries represented in Velopedia for this period. Its 72° seat angle is toward the more relaxed end among the same-period mountain references.
This is historical model-level reference geometry, not a known frame-size geometry table or a ride test. Frame size, rider proportions, cockpit setup, tires, suspension and components can materially change fit and handling.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.