Velopedia Bicycle Archive

2003 HH Racing Group Phat Jawn Pro XL (euro)

Original specifications: 20" wheels · 22 lb published weight · legacy reference geometry.

Share owner experience

Planning to sell? Draft your listing

At a glance

Archive #91829
Model year
2003
Category
BMX
Original MSRP
$850.00
Sizes
Pro XL (euro)
Colors
Black, Candy Blue, Candy Red, White
Weight
22 lb
Geometry
Legacy reference
In this record
23 specifications · archived image · original MSRP · geometry
Campaign
Original buildChromoly, 4130 · 20" wheels

Manufacturer catalog

Published sizes and colors

1 size · 4 colors

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published sizes

Pro XL (euro)

Published colors

BlackCandy BlueCandy RedWhite

Frameset

Frame ConstructionTIG-welded
Frame MaterialChromoly, 4130
ForkHH Custom BMX
Fork MaterialChromoly, 4130, unicrown crown

Drivetrain

CranksetProfile 3-piece, 44 teeth
Bottom BracketProfile sealed bearing, 115mm spindle
BB Shell Width68mm English
Rear Cogs1-speed, 16 teeth
ChainKMC, 1/2 x 3/32"
PedalsNot included

Brakes

BrakesTektro 829A linear pull rear brakes, Tektro Talon rear levers

Cockpit & Contact Points

Headset1 1/8" threadless Cane Creek S-2
HandlebarOdyssey
StemProfile
SaddleOdyssey
SeatpostHH Ti Post, 26.8mm diameter

Wheels & Tires

HubsSun Ringle
RimsSun Rims Rhyno Lite, 36-hole
SpokesDT stainless steel, 14ga. (2.0mm) straight gauge
Spoke NipplesBrass nipples
Front Tire20 x 2.125" IRC Siren
Rear Tire20 x 1.75" IRC Siren
Wheel Size20" wheels

Geometry

Legacy reference · 5 measurements

Historical measurements. Frame size unknown.

All geometry measurementsLegacy reference · 5 measurements
MeasurementLegacy reference
Top tube533.4 mm
Head-tube angle73.5°
Seat-tube angle71°
Chainstay / rear center381 mm
Wheelbase965.2 mm

Frame size not recorded.

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

Published build44T · 16T · 1-speed
Ratio2.75:1
Estimated speed At 90 RPM Gear14.4 mph

Rear tire: 20×1.75.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Front tire · Original
20 x 2.125" IRC Siren
Brake pads · Original
Tektro 829A linear pull rear brakes

Tektro Talon rear levers

Seatpost · Original
HH Ti Post

26.8mm diameter

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
Front: 20 x 2.125" IRC Siren, Rear: 20 x 1.75" IRC Siren
Drivetrain
1-speed
Seatpost diameter
26.8 mm
Bottom bracket / shell
Profile sealed bearing, 115mm spindle · 68mm English
Campaign
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded · Fork: HH Custom BMX · Chromoly, 4130, unicrown crown

Archived: Crankset: Profile 3-piece, 44 teeth · Bottom bracket: Profile sealed bearing, 115mm spindle · Rear cogs: 1-speed, 16 teeth · Chain: KMC, 1/2 x 3/32"

Archived: Brakes: Tektro 829A linear pull rear brakes, Tektro Talon rear levers

Archived: Wheel size: 20" wheels · Rims: Sun Rims Rhyno Lite, 36-hole · Hubs: Sun Ringle · Front tire: Front: 20 x 2.125" IRC Siren, Rear: 20 x 1.75" IRC Siren

Controls and contact points

Archived: Headset: 1 1/8" threadless Cane Creek S-2 · Handlebar: Odyssey · Stem: Profile · Seatpost: HH Ti Post, 26.8mm diameter · Saddle: Odyssey · Pedals: Not included

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help preserve its real-world history by sharing your owner experience.

Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

No recent price sample is available for this bike. Check eBay for matching listings.

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

Scroll to Top