Uses front tire 26×2.35; rear size isn’t listed.
Velopedia Bicycle Archive
2004 Haro Extreme X1
Original specifications: Shimano Deore · 8-speed · mechanical rear derailleur · 26" wheels · 35.3 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #92485- Model year
- 2004
- Category
- Mountain
- Original MSRP
- $800.00
- Sizes
- XS, S, M, L
- Weight
- 35.3 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 4 other years
Browse other years
Compare side by side
Identification clues
2004 archived details
- Frame
- 7005 aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Marzocchi MZ Comp, 100mm travel |
| Fork Material | Aluminum, single crown |
| Rear Shock | X-Fusion Coil Over w/rebound adj, 5.0" travel |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano Alivio RapidFire Plus |
| Front Derailleur | Shimano Alivio |
| Rear Derailleur | Shimano Deore SGS |
| Crankset | FSA Alpha Drive, 22/32/44 teeth |
| Bottom Bracket | FSA Isis |
| Rear Cogs | 8-speed, 11 - 32 teeth |
| Chain | Shimano CN-IG51, 1/2 x 3/32" |
| Pedals | Nylon body, steel cage w/clips & straps |
Brakes
| Brakes | Hayes Mechanical Disc brakes, Tektro linear-pull levers |
|---|
Cockpit & Contact Points
| Handlebar | Aluminum, 1.5" rise |
|---|---|
| Handlebar Extensions | Not included |
| Stem | Aluminum Ahead type |
| Saddle | Titec Ithys Amore |
| Seatpost | Aluminum micro-adjust, 30.9mm diameter |
Wheels & Tires
| Hubs | Formula disc |
|---|---|
| Rims | Alex DM-18, 32-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.35" Kenda Blue Groove |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 604.5 mm |
| Head-tube angle | 70° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 429.3 mm |
| Wheelbase | 1110 mm |
| Fork offset / rake | 38.1 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"
30.9mm diameter
More parts (6)Fewer parts
22/32/44 teeth
32-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.35" Kenda Blue Groove
- Drivetrain
- 8-speed
- Seatpost diameter
- 30.9 mm
- Bottom bracket / shell
- FSA ISIS
Equipment inspection checks 13 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Marzocchi MZ Comp, 100mm travel · Aluminum, single crown
Suspension
Evaluate the suspension →Archived: Fork: Marzocchi MZ Comp, 100mm travel · Rear shock: X-Fusion Coil Over w/rebound adj, 5.0" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano Alivio RapidFire Plus · Front derailleur: Shimano Alivio · Rear derailleur: Shimano Deore SGS · Crankset: FSA Alpha Drive, 22/32/44 teeth · Bottom bracket: FSA ISIS · Rear cogs: 8-speed, 11 - 32 teeth · Chain: Shimano CN-IG51, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Hayes Mechanical Disc brakes, Tektro linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Alex DM-18, 32-hole · Hubs: Formula disc · Front tire: 26 x 2.35" Kenda Blue Groove
Controls and contact points
Archived: Handlebar: Aluminum, 1.5" rise · Stem: Aluminum Ahead type · Seatpost: Aluminum micro-adjust, 30.9mm diameter · Saddle: Titec Ithys Amore · Pedals: Nylon body, steel cage w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





