Velopedia Bicycle Archive

2004 Haro Backtrail Z12

Original specifications: 12" wheels · legacy reference geometry.

Share owner experience

Planning to sell? Draft your listing

At a glance

Archive #30797
Model year
2004
Category
Kids
Sizes
Junior
Colors
Absolut Red, Candy Blue
Geometry
Legacy reference
In this record
21 specifications · archived image · geometry
Original buildHi-tensile steel · 12" wheels

Manufacturer catalog

Published sizes and colors

1 size · 2 colors

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published sizes

Junior

Published colors

Absolut RedCandy Blue

Frameset

Frame ConstructionTIG-welded
Frame MaterialHi-tensile steel
ForkHaro
Fork MaterialHi-tensile steel, unicrown crown

Drivetrain

CranksetHaro, 28 teeth
Bottom BracketFusion sealed
BB Shell Width68mm American
Rear Cogs1-speed, 16 teeth
ChainKMC Z410, 1/2 x 1/8"
PedalsResin

Cockpit & Contact Points

Headset1" threaded steel
HandlebarHaro 16" Mini
StemFusion
SaddleHaro
SeatpostHaro straight, 22.2mm diameter

Wheels & Tires

HubsFront: steel, nutted, Rear: steel, coaster brake
RimsAluminum, 16-hole
Spokes14ga. (2.0mm) straight gauge
Spoke NipplesBrass nipples
Front Tire12 x 2.125" Kenda K-50
Wheel Size12" wheels

Geometry

Legacy reference · 3 measurements

Historical measurements. Frame size unknown.

All geometry measurementsLegacy reference · 3 measurements
MeasurementLegacy reference
Top tube303.5 mm
Head-tube angle70°
Seat-tube angle68.5°

Frame size not recorded.

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

Published build28T · 16T · 1-speed
Ratio1.75:1
Estimated speed At 90 RPM Gear5.7 mph

Uses front tire 12×2.125; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Front tire · Original
12 x 2.125" Kenda K-50 Replacement search: 12x2.125 bicycle tire Before ordering: Check rim type and tire clearance.
Seatpost · Original
Haro straight

22.2mm diameter

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
12 x 2.125" Kenda K-50
Drivetrain
1-speed
Seatpost diameter
22.2 mm
Bottom bracket / shell
Fusion sealed · 68mm American
Equipment inspection checks 9 checks based on 4 archived component groups Open equipment checksClose equipment checks
0 of 9 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded · Fork: Haro · Hi-tensile steel, unicrown crown

Archived: Crankset: Haro, 28 teeth · Bottom bracket: Fusion sealed · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z410, 1/2 x 1/8"

Archived: Wheel size: 12" wheels · Rims: Aluminum, 16-hole · Hubs: Front: steel, nutted, Rear: steel, coaster brake · Front tire: 12 x 2.125" Kenda K-50

Controls and contact points

Archived: Headset: 1" threaded steel · Handlebar: Haro 16" Mini · Stem: Fusion · Seatpost: Haro straight, 22.2mm diameter · Saddle: Haro · Pedals: Resin

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help preserve its real-world history by sharing your owner experience.

Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

No recent price sample is available for this bike. Check eBay for matching listings.

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Scroll to Top