Velopedia Bicycle Archive

2009 GT Slammer

Original specifications: BMX drivetrain · 20" wheels.

Share owner experience

Planning to sell? Draft your listing

No archive photo is available for this record.

At a glance

Archive #18798
Model year
2009
Category
BMX
Original MSRP
$259.99
Sizes
19.5" TT
Colors
Brown/Yellow
In this record
24 specifications · original MSRP
Model history 3 other years

Browse other years

Compare side by side

Identification clues

2009 archived details

Published colors
Brown/Yellow
Frame
High Tensile Steel
Original equipment
BMX

Clues, not proof of model year. Colors vary and components may have been replaced.

Campaign
Original buildHigh Tensile Steel · BMX · 20" wheels

Historical catalog variants

Archived sizes and colors

1 item record

Item-level catalog entries recovered from Velopedia’s original bicycle archive. They document how this model was listed historically; they do not identify the frame size associated with legacy reference geometry or indicate current availability.

Published sizes

19.5" TT

Published colors

Brown/Yellow
View 1 archived size/color combination
SizeColor
19.5" TTBrown/Yellow

Historical catalog evidence. Exact specifications and naming may vary by market, production run or manufacturer revision.

Frameset

Frame ConstructionTIG-welded
Frame MaterialHigh Tensile Steel
ForkGT Freestyle
Fork MaterialHigh-tensile steel, unicrown crown

Drivetrain

Component GroupBMX
CranksetSteel One Piece, 36 teeth
Bottom BracketSteel
CassetteFreewheel
Rear Cogs1-speed, 14 teeth
ChainKMC Z510
PedalsGT Jump design, resin

Brakes

BrakesTektro 907 U-brake brakes, Tektro 289A levers

Cockpit & Contact Points

Headset1 1/8" TH
HandlebarGT dirt/street Hi-Ten
Handlebar ExtensionsNot included
StemGT Freestyle aluminum
SaddleGT freestyle
SeatpostSteel, 25.4mm diameter

Wheels & Tires

HubsSteel 14mm axle
RimsAlex G303, 48-hole
Spokes14ga. (2.0mm)
Spoke NipplesBrass
Front Tire20 x 2.10" GT Air Bags
Wheel Size20" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

Published build36T · 14T · 1-speed
Ratio2.57:1
Estimated speed At 90 RPM Gear13.9 mph

Uses front tire 20×2.1; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Front tire · Original
20 x 2.10" GT Air Bags Replacement search: 20x2.1 bicycle tire Before ordering: Check rim type and tire clearance.
Seatpost · Original
Steel

25.4mm diameter

Rims · Original
Alex G303

48-hole

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
20 x 2.10" GT Air Bags
Drivetrain
1-speed
Seatpost diameter
25.4 mm
Bottom bracket / shell
Steel
Campaign
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded · Fork: GT Freestyle · High-tensile steel, unicrown crown

Archived: Group: BMX · Crankset: Steel One Piece, 36 teeth · Bottom bracket: Steel · Cassette: Freewheel · Rear cogs: 1-speed, 14 teeth · Chain: KMC Z510

Archived: Brakes: Tektro 907 U-brake brakes, Tektro 289A levers

Archived: Wheel size: 20" wheels · Rims: Alex G303, 48-hole · Hubs: Steel 14mm axle · Front tire: 20 x 2.10" GT Air Bags

Controls and contact points

Archived: Headset: 1 1/8" TH · Handlebar: GT dirt/street Hi-Ten · Stem: GT Freestyle aluminum · Seatpost: Steel, 25.4mm diameter · Saddle: GT freestyle · Pedals: GT Jump design, resin

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

Scroll to Top