Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
1999 Giant Yukon SE
Original specifications: Shimano Alivio · 8-speed · mechanical rear derailleur · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #87904- Model year
- 1999
- Category
- Mountain
- Original MSRP
- $450.00
- Sizes
- 14.5", 17.5", 19.5", 21.5", 23.5"
- Colors
- Purple/Black Split, Red
- Geometry
- Legacy reference
- In this record
- 24 specifications · archived image · original MSRP · geometry
Model history 5 other years
Browse other years
Compare side by side
Identification clues
1999 archived details
- Published colors
- Purple/Black Split, Red
- Frame
- Custom 6061 Aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildCustom 6061 Aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Custom 6061 Aluminum |
| Fork | SR MG80, 3.0" travel |
| Fork Material | Aluminum/magnesium, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Grip Shift Centera |
| Front Derailleur | Shimano Alivio |
| Rear Derailleur | Shimano Alivio |
| Crankset | SR XR27, 22/32/42 teeth |
| Bottom Bracket | Shimano cartridge |
| Rear Cogs | 8-speed, 11 - 30 teeth |
| Chain | KMC Z-72, 1/2 x 3/32" |
| Pedals | MTB steel w/nylon toe clips & straps |
Brakes
| Brakes | Dia-Compe 733 Direct Pull w/linear spring brakes, Dia-Compe DP-7 Alloy Direct Pull levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tange TG Aheadset |
|---|---|
| Handlebar | Alloy MTB |
| Stem | Alloy Ahead 25D rise |
| Saddle | Giant MTB |
| Seatpost | Aluminum micro-adjust, 300mm, 30.8mm diameter |
Wheels & Tires
| Hubs | Shimano Alivio |
|---|---|
| Rims | Alloy, single wall, 36-hole |
| Spokes | Stainless steel, 2.0mm |
| Front Tire | 26 x 2.10" WTB VelociRaptor |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 566.9 mm |
| Head-tube angle | 71.3° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 431.8 mm |
| Wheelbase | 1047 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"

SRAM PC-830 Chain One Color, 8 Speed
Replacement option
More parts (3)Fewer parts
300mm, 30.8mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" WTB VelociRaptor
- Drivetrain
- 8-speed
- Seatpost diameter
- 30.8 mm
- Bottom bracket / shell
- Shimano cartridge
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: SR MG80, 3.0" travel · Aluminum/magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: SR MG80, 3.0" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Grip Shift Centera · Front derailleur: Shimano Alivio · Rear derailleur: Shimano Alivio · Crankset: SR XR27, 22/32/42 teeth · Bottom bracket: Shimano cartridge · Rear cogs: 8-speed, 11 - 30 teeth · Chain: KMC Z-72, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Dia-Compe 733 Direct Pull w/linear spring brakes, Dia-Compe DP-7 Alloy Direct Pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Alloy, single wall, 36-hole · Hubs: Shimano Alivio · Front tire: 26 x 2.10" WTB VelociRaptor
Controls and contact points
Archived: Headset: 1 1/8" threadless Tange TG Aheadset · Handlebar: Alloy MTB · Stem: Alloy Ahead 25D rise · Seatpost: Aluminum micro-adjust, 300mm, 30.8mm diameter · Saddle: Giant MTB · Pedals: MTB steel w/nylon toe clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



