Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
1998 Giant ATX 970
Original specifications: Shimano STX drivetrain · 26" wheels · 29 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #79397- Model year
- 1998
- Category
- Mountain
- Original MSRP
- $949.99
- Sizes
- S, M, L
- Colors
- Lime/mango, Navy Blue/Mango
- Weight
- 29 lb
- Geometry
- Legacy reference
- In this record
- 28 specifications · archived image · original MSRP · geometry
Model history 2 other years
Browse other years
Compare side by side
Identification clues
1998 archived details
- Published colors
- Lime/mango, Navy Blue/Mango
- Frame
- LPD 6061 T6 aluminum
- Original equipment
- Shimano STX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildLPD 6061 T6 aluminum · Shimano STX · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | LPD 6061 T6 aluminum |
| Fork | Answer Manitou Spyder R |
| Fork Material | Aluminum/magnesium, triple-clamp crown |
| Rear Shock | RST 22, 3.5" travel |
Drivetrain
| Component Group | Shimano STX |
|---|---|
| Shifters | Shimano STX RapidFire SL |
| Front Derailleur | Shimano STX top-swing |
| Rear Derailleur | Shimano STX |
| Crankset | Shimano STX, 24/32/42 teeth |
| Bottom Bracket | Tange BB-UN55 |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 11 - 28 teeth |
| Chain | Sachs PC-41, 1/2 x 3/32" |
| Pedals | EXT-tec w/clips & straps |
Brakes
| Brakes | Shimano STX V-Brake brakes, Dia-Compe DP-7 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tioga TG |
|---|---|
| Handlebar | Aluminum |
| Handlebar Extensions | Aluminum, ski bend |
| Stem | Aluminum |
| Saddle | WTB SST, hollow chromoly rails |
| Seatpost | Aluminum micro-adjust, 30.8mm diameter |
Wheels & Tires
| Hubs | Front: suspension, Rear: Shimano STX-RC |
|---|---|
| Rims | WTB SpeedMaster, 32-hole |
| Spokes | Stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.10" WTB Primal Raptor |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 556.3 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 424.2 mm |
| Wheelbase | 1066.8 mm |
| Fork offset / rake | 40.6 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Dia-Compe DP-7 levers
More parts (7)Fewer parts
hollow chromoly rails
24/32/42 teeth
30.8mm diameter
32-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" WTB Primal Raptor
- Drivetrain
- 8-speed
- Seatpost diameter
- 30.8 mm
- Bottom bracket / shell
- Tange BB-UN55 · 68mm English
Equipment inspection checks 13 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Answer Manitou Spyder R · Aluminum/magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Answer Manitou Spyder R · Rear shock: RST 22, 3.5" travel
Drivetrain
Check drivetrain wear →Archived: Group: Shimano STX · Shifters: Shimano STX RapidFire SL · Front derailleur: Shimano STX top-swing · Rear derailleur: Shimano STX · Crankset: Shimano STX, 24/32/42 teeth · Bottom bracket: Tange BB-UN55 · Rear cogs: 8-speed, 11 - 28 teeth · Chain: Sachs PC-41, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano STX V-Brake brakes, Dia-Compe DP-7 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: WTB SpeedMaster, 32-hole · Hubs: Front: suspension, Rear: Shimano STX-RC · Front tire: 26 x 2.10" WTB Primal Raptor
Controls and contact points
Archived: Headset: 1 1/8" threadless Tioga TG · Handlebar: Aluminum · Stem: Aluminum · Seatpost: Aluminum micro-adjust, 30.8mm diameter · Saddle: WTB SST, hollow chromoly rails · Pedals: EXT-tec w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




