Lowest0.88:1
Highest4.36:1
Total range499%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×35; rear size isn’t listed.
Velopedia Bicycle Archive
2006 Fuji Crosstown 1.0
Original specifications: Shimano Deore · 7-speed · mechanical rear derailleur · 700c wheels · 30.1 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #94466- Model year
- 2006
- Category
- Hybrid
- Original MSRP
- $520.00
- Sizes
- 15", 17", 19", 21", 23", womens 15", womens 17", womens 19"
- Colors
- Gloss Black
- Weight
- 30.1 lb
- In this record
- 24 specifications · archived image · original MSRP
Model history 5 other years
Browse other years
Compare side by side
Identification clues
2006 archived details
- Published colors
- Gloss Black
- Frame
- Altair 1 aluminum
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildAltair 1 aluminum · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Altair 1 aluminum |
| Fork | RST CT-COM 2, 30mm travel |
| Fork Material | Aluminum, single crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | SRAM MRX Pro |
| Front Derailleur | Shimano Deore, dual-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Deore |
| Crankset | Suntour CR-400, 28/38/48 teeth |
| Bottom Bracket | Steel |
| Rear Cogs | 7-speed, 11 - 32 teeth |
| Chain | KMC HG-73, 1/2 x 3/32" |
| Pedals | Wellgo |
Brakes
| Brakes | ProMax linear-pull brakes, Promax aluminum levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threaded sealed |
|---|---|
| Handlebar | Aluminum |
| Stem | Aluminum adjustable |
| Saddle | Fuji Comfort Hybrid |
| Seatpost | Aluminum suspension |
Wheels & Tires
| Hubs | Formula aluminum |
|---|---|
| Rims | Alex ID-19, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Front Tire | 700 x 35c Kenda K-934 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
KMC HG-73
1/2 x 3/32"
700 x 35c Kenda K-934
Replacement search: 700cx35 bicycle tire Before ordering: Check rim type and tire clearance.
ProMax linear-pull brakes
Promax aluminum levers
More parts (2)Fewer parts
Shimano Deore
Alex ID-19
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 35c Kenda K-934
- Drivetrain
- 7-speed
- Bottom bracket / shell
- Steel
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: RST CT-COM 2, 30mm travel · Aluminum, single crown
Suspension
Evaluate the suspension →Archived: Fork: RST CT-COM 2, 30mm travel
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: SRAM MRX Pro · Front derailleur: Shimano Deore, dual-pull/clamp-on 31.8mm · Rear derailleur: Shimano Deore · Crankset: Suntour CR-400, 28/38/48 teeth · Bottom bracket: Steel · Rear cogs: 7-speed, 11 - 32 teeth · Chain: KMC HG-73, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: ProMax linear-pull brakes, Promax aluminum levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Alex ID-19, 36-hole · Hubs: Formula aluminum · Front tire: 700 x 35c Kenda K-934
Controls and contact points
Archived: Headset: 1 1/8" threaded sealed · Handlebar: Aluminum · Stem: Aluminum adjustable · Seatpost: Aluminum suspension · Saddle: Fuji Comfort Hybrid · Pedals: Wellgo
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.