Uses front tire 700C×26; rear size isn’t listed.
Velopedia Bicycle Archive
2004 Fuji Royale
Original specifications: Shimano Ultegra · 9-speed · mechanical rear derailleur · 700c wheels · 19.9 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #31238- Model year
- 2004
- Category
- City & Commuter
- Original MSRP
- $1,049.99
- Sizes
- 15", 17", 19", 21", 23"
- Colors
- Blue
- Weight
- 19.9 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 4 other years
Browse other years
Compare side by side
Identification clues
2004 archived details
- Published colors
- Blue
- Frame
- X-Fusion Quaternary Aluminum
- Original equipment
- Flatbar Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildX-Fusion Quaternary Aluminum · Flatbar Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | X-Fusion Quaternary Aluminum |
| Fork | Fuji Carbon |
| Fork Material | Carbon fiber w/aluminum steerer, aero crown |
Drivetrain
| Component Group | Flatbar Mix |
|---|---|
| Shifters | Shimano SL-R440 Flat Bar |
| Front Derailleur | Shimano FD-443, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Ultegra GS |
| Crankset | TruVativ Elita, 30/42/52 teeth |
| Bottom Bracket | FSA ISIS, 118mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 9-speed, 12 - 25 teeth |
| Chain | Shimano CN-HG73, 1/2 x 3/32" |
| Pedals | Wellgo WPD-919 |
Brakes
| Brakes | Tektro 926 Mini V brakes, Tektro linear-pull levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threaded aluminum |
|---|---|
| Handlebar | Ritchey Comp |
| Handlebar Extensions | Not included |
| Stem | Ritchey Comp |
| Saddle | Fuji Ultralight Racing |
| Seatpost | Ritchey Comp |
Wheels & Tires
| Hubs | Ritchey Comp |
|---|---|
| Rims | Front: Ritchey Pro, Rear: Ritchey OCR Pro, 32-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 26c Kenda Kontender |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 555 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 440 mm |
| Wheelbase | 1038 mm |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Tektro linear-pull levers
More parts (8)Fewer parts
118mm spindle
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 26c Kenda Kontender
- Drivetrain
- 9-speed
- Bottom bracket / shell
- FSA ISIS, 118mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Fuji Carbon · Carbon fiber w/aluminum steerer, aero crown
Drivetrain
Check drivetrain wear →Archived: Group: Flatbar Mix · Shifters: Shimano SL-R440 Flat Bar · Front derailleur: Shimano FD-443, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Ultegra GS · Crankset: TruVativ Elita, 30/42/52 teeth · Bottom bracket: FSA ISIS, 118mm spindle · Rear cogs: 9-speed, 12 - 25 teeth · Chain: Shimano CN-HG73, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro 926 Mini V brakes, Tektro linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Front: Ritchey Pro, Rear: Ritchey OCR Pro, 32-hole · Hubs: Ritchey Comp · Front tire: 700 x 26c Kenda Kontender
Controls and contact points
Archived: Headset: 1 1/8" threaded aluminum · Handlebar: Ritchey Comp · Stem: Ritchey Comp · Seatpost: Ritchey Comp · Saddle: Fuji Ultralight Racing · Pedals: Wellgo WPD-919
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





