Uses front tire 700C×26; rear size isn’t listed.
Velopedia Bicycle Archive
2003 Fuji Sagres
Original specifications: Hybrid Mix drivetrain · 700c wheels · 26.4 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #38439- Model year
- 2003
- Category
- City & Commuter
- Original MSRP
- $479.00
- Sizes
- 15", 17", 19", 21", 23"
- Colors
- Matte Emerald
- Weight
- 26.4 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 11 other years
Browse other years
Compare side by side
Identification clues
2003 archived details
- Published colors
- Matte Emerald
- Frame
- Altair 2 7000 Series Aluminum
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildAltair 2 7000 Series Aluminum · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Altair 2 7000 Series Aluminum |
| Fork | Fuji |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Shimano SL-R440 |
| Front Derailleur | Shimano FD-443, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano RD-2200 |
| Crankset | Cyclone Precision Road, 30/42/52 teeth |
| Bottom Bracket | Sealed cartridge, 116mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 12 - 25 teeth |
| Chain | KMC Z72, 1/2 x 3/32" |
| Pedals | Wellgo LU-962 |
Brakes
| Brakes | Tektro 917 Mini V brakes, Shimano ST-R223 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless steel w/water seal |
|---|---|
| Handlebar | Aluminum flat bar |
| Handlebar Extensions | Not included |
| Stem | Aluminum |
| Saddle | Fuji Sport |
| Seatpost | Aluminum micro-adjust, 27.2mm diameter |
Wheels & Tires
| Hubs | Aluminum, Q/R |
|---|---|
| Rims | Alex RP-15F, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 26c Kenda Kontender |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 555 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 440 mm |
| Wheelbase | 1038 mm |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"

SRAM PC-830 Chain One Color, 8 Speed
Replacement option

Pirelli P7 Sport Clincher Tire Black, 700x26
700x26c
Replacement option
27.2mm diameter

Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
More parts (5)Fewer parts
Shimano ST-R223 levers
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 26c Kenda Kontender
- Drivetrain
- 8-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Sealed cartridge, 116mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Fuji · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Shimano SL-R440 · Front derailleur: Shimano FD-443, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano RD-2200 · Crankset: Cyclone Precision Road, 30/42/52 teeth · Bottom bracket: Sealed cartridge, 116mm spindle · Rear cogs: 8-speed, 12 - 25 teeth · Chain: KMC Z72, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro 917 Mini V brakes, Shimano ST-R223 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Alex RP-15F, 36-hole · Hubs: Aluminum, Q/R · Front tire: 700 x 26c Kenda Kontender
Controls and contact points
Archived: Headset: 1 1/8" threadless steel w/water seal · Handlebar: Aluminum flat bar · Stem: Aluminum · Seatpost: Aluminum micro-adjust, 27.2mm diameter · Saddle: Fuji Sport · Pedals: Wellgo LU-962
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





