Uses front tire 24×2; rear size isn’t listed.
Velopedia Bicycle Archive
2001 Fuji Blaster
Original specifications: 24" wheels · 28.6 lb published weight · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #91016- Model year
- 2001
- Category
- Kids
- Original MSRP
- $200.00
- Sizes
- 13"
- Colors
- Black, Purple
- Weight
- 28.6 lb
- Geometry
- Legacy reference
- In this record
- 24 specifications · archived image · original MSRP · geometry
Model history 7 other years
Browse other years
Compare side by side
Identification clues
2001 archived details
- Published colors
- Black, Purple
- Frame
- Hi-tensile steel, oversize
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildHi-tensile steel, oversize · 24" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Hi-tensile steel, oversize |
| Fork Material | Chromoly/hi-tensile steel |
Drivetrain
| Shifters | Shimano Tourney RevoShift |
|---|---|
| Front Derailleur | Shimano Tourney TY-32, top-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano Tourney TY-22 |
| Crankset | ProWheel resin/steel, 28/38/48 teeth |
| Bottom Bracket | VP sealed, 127.5mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 13 - 28 teeth |
| Chain | KMC UG-50, 1/2 x 3/32" |
| Pedals | Wellgo resin |
Brakes
| Brakes | Aluminum linear-pull brakes, aluminum linear-pull levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" sealed mechanism |
|---|---|
| Handlebar | Aluminum MTB |
| Handlebar Extensions | Not included |
| Stem | TIG welded ATB |
| Saddle | Fuji DuraFlex Junior |
| Seatpost | Steel, 25.6mm diameter |
Wheels & Tires
| Hubs | Steel, nutted |
|---|---|
| Rims | Weinmann CN-520, 36-hole |
| Spokes | UCP, 14g |
| Front Tire | 24 x 2.00" Innova ATB |
| Wheel Size | 24" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 525 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 410 mm |
| Wheelbase | 988 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
aluminum linear-pull levers
More parts (2)Fewer parts
25.6mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 24 x 2.00" Innova ATB
- Drivetrain
- 7-speed
- Seatpost diameter
- 25.6 mm
- Bottom bracket / shell
- VP sealed, 127.5mm spindle · 68mm English
Equipment inspection checks 9 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: · Chromoly/hi-tensile steel
Drivetrain
Check drivetrain wear →Archived: Shifters: Shimano Tourney RevoShift · Front derailleur: Shimano Tourney TY-32, top-pull/clamp-on 28.6mm · Rear derailleur: Shimano Tourney TY-22 · Crankset: ProWheel resin/steel, 28/38/48 teeth · Bottom bracket: VP sealed, 127.5mm spindle · Rear cogs: 7-speed, 13 - 28 teeth · Chain: KMC UG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Aluminum linear-pull brakes, aluminum linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 24" wheels · Rims: Weinmann CN-520, 36-hole · Hubs: Steel, nutted · Front tire: 24 x 2.00" Innova ATB
Controls and contact points
Archived: Headset: 1 1/8" sealed mechanism · Handlebar: Aluminum MTB · Stem: TIG welded ATB · Seatpost: Steel, 25.6mm diameter · Saddle: Fuji DuraFlex Junior · Pedals: Wellgo resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





