Lowest0.73:1
Highest4.00:1
Total range545%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Rear tire: 26×2.1.
Velopedia Bicycle Archive
2000 Fuji Outland
Original specifications: Shimano Deore · 8-speed · mechanical rear derailleur · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #45109- Model year
- 2000
- Category
- Mountain
- Original MSRP
- $499.99
- Sizes
- 13", 15", 17", 19", 20.5", 22"
- Colors
- Blue/Silver Two Tone
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 7 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Blue/Silver Two Tone
- Frame
- 7005 aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Rock Shox Jett, 2.5" travel |
| Fork Material | Aluminum/magnesium, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano Alivio RapidFire Plus |
| Front Derailleur | Shimano Acera top-swing, top-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Deore |
| Crankset | TruVativ Firex cold forged, 22/32/44 teeth |
| Bottom Bracket | Tien Hsin BB-7700, 116mm spindle |
| Rear Cogs | 8-speed, 11 - 30 teeth |
| Chain | Shimano CN-IG31, 1/2 x 3/32" |
| Pedals | VP resin |
Brakes
| Brakes | ProMax linear-pull brakes, Shimano Alivio levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Cane Creek |
|---|---|
| Handlebar | Fuji alloy |
| Handlebar Extensions | Not included |
| Stem | Alloy |
| Saddle | Fuji DuraFlex Racing |
| Seatpost | Kalloy |
Wheels & Tires
| Hubs | Front: alloy, Rear: Shimano Alivio |
|---|---|
| Rims | Alex DM-18, 32-hole |
| Spokes | Stainless steel, 2.0mm |
| Front Tire | 26 x 2.10" Kenda Hammer |
| Rear Tire | 26 x 2.10" Kenda Anvil |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 3 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 419.1 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Shimano CN-IG31
1/2 x 3/32"
Retailer offers
SRAM PC-830 Chain One Color, 8 Speed
Replacement option
Shimano CN-IG31 on eBaySponsored links
More parts (4)Fewer parts
ProMax linear-pull brakes
Shimano Alivio levers
Shimano Deore
Shimano Alivio RapidFire Plus
Alex DM-18
32-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 26 x 2.10" Kenda Hammer, Rear: 26 x 2.10" Kenda Anvil
- Drivetrain
- 8-speed
- Bottom bracket / shell
- Tien Hsin BB-7700, 116mm spindle
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Rock Shox Jett, 2.5" travel · Aluminum/magnesium, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: Rock Shox Jett, 2.5" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano Alivio RapidFire Plus · Front derailleur: Shimano Acera top-swing, top-pull/clamp-on 31.8mm · Rear derailleur: Shimano Deore · Crankset: TruVativ Firex cold forged, 22/32/44 teeth · Bottom bracket: Tien Hsin BB-7700, 116mm spindle · Rear cogs: 8-speed, 11 - 30 teeth · Chain: Shimano CN-IG31, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: ProMax linear-pull brakes, Shimano Alivio levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Alex DM-18, 32-hole · Hubs: Front: alloy, Rear: Shimano Alivio · Front tire: Front: 26 x 2.10" Kenda Hammer, Rear: 26 x 2.10" Kenda Anvil
Controls and contact points
Archived: Headset: 1 1/8" threadless Cane Creek · Handlebar: Fuji alloy · Stem: Alloy · Seatpost: Kalloy · Saddle: Fuji DuraFlex Racing · Pedals: VP resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.