Lowest1.54:1
Highest4.00:1
Total range260%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×28; rear size isn’t listed.
Velopedia Bicycle Archive
1993 Fuji Ace
Original specifications: Shimano 300EX drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #41017- Model year
- 1993
- Category
- Road
- Original MSRP
- $400.00
- Sizes
- 49, 52, 54, 56, 58, 61, 64
- Geometry
- Legacy reference
- In this record
- 20 specifications · original MSRP · geometry
Model history 8 other years
Browse other years
Compare side by side
Identification clues
1993 archived details
- Frame
- Tange DB chrome-moly
- Original equipment
- Shimano 300EX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildTange DB chrome-moly · Shimano 300EX · 700c wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Tange DB chrome-moly |
| Fork | Fuji chrome-moly racing |
Drivetrain
| Component Group | Shimano 300EX |
|---|---|
| Shifters | Shimano 300EX downtube |
| Front Derailleur | Shimano 300EX |
| Rear Derailleur | Shimano 300EX |
| Crankset | Shimano 300EX, 40/52 teeth |
| Rear Cogs | 7-speed, 13 - 26 teeth |
| Chain | Shimano CN-HG50 |
| Pedals | Lightweight nylon racing w/clips and straps |
Brakes
| Brakes | Shimano 300EX brakes, levers |
|---|
Cockpit & Contact Points
| Handlebar | SR CMB-200 Silver Alloy |
|---|---|
| Stem | TIG Cro-Moly Racing |
| Saddle | Fuji DuraFlex Gel |
| Seatpost | Lightweight Alloy, micro-adjust |
Wheels & Tires
| Hubs | Shimano Exage |
|---|---|
| Rims | Araya SS-45, 36-hole |
| Front Tire | 700 x 28c Cheng Shin Racing |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 560 mm |
| Head-tube angle | 73.5° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 410 mm |
| Wheelbase | 987 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
700 x 28c Cheng Shin Racing
Replacement search: 700cx28 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano 300EX
40/52 teeth
More parts (1)Fewer parts
Shimano Exage
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 28c Cheng Shin Racing
- Drivetrain
- 7-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Fuji chrome-moly racing
Drivetrain
Check drivetrain wear →Archived: Group: Shimano 300EX · Shifters: Shimano 300EX downtube · Front derailleur: Shimano 300EX · Rear derailleur: Shimano 300EX · Crankset: Shimano 300EX, 40/52 teeth · Rear cogs: 7-speed, 13 - 26 teeth · Chain: Shimano CN-HG50
Brakes
Inspect the brakes →Archived: Brakes: Shimano 300EX brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya SS-45, 36-hole · Hubs: Shimano Exage · Front tire: 700 x 28c Cheng Shin Racing
Controls and contact points
Archived: Handlebar: SR CMB-200 Silver Alloy · Stem: TIG Cro-Moly Racing · Seatpost: Lightweight Alloy, micro-adjust · Saddle: Fuji DuraFlex Gel · Pedals: Lightweight nylon racing w/clips and straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.