2015 Felt Z2 Disc

Archived: Frame: Felt Endurance Road Disc UHC Performance carbon fiber, MMC w/ InsideOut construction, BB30, carbon fiber dropouts, replaceable rear derailleur hanger, IS disc mount, electronic compatible internal cable routing (mechanical compatible) · Fork: Felt Endurance Road Disc UHC Performance carbon fiber monocoque construction, ControlTaper 1.125" - 1.5" carbon fiber steer tube w/ integrated crown race, crown, blades w/ 140mm post mount disc tabs & dropouts · Carbon Fiber

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Shimano Ultegra Di2 · Shifters: Shimano R785 Di2 Hydraulic · Front derailleur: Shimano Ultegra Di2 braze-on · Rear derailleur: Shimano Ultegra Di2 long cage · Crankset: FSA SL-K Light ABS 50/34T BB386 51cm = 170mm 54 - 56cm = 172.5mm 58 - 61cm = 175mm · Bottom bracket: FSA BB30 w/ BB386 reducers · Rear cogs: Shimano 11-speed, 11-32T · Chain: Shimano 11-speed

• Confirm every shift battery charges and every control operates. Shift through the full cassette under light load while checking pairing, derailleur alignment and response at both ends of the range.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano R785 hydraulic disc w/ Shimano Ice-Tech 140mm centerlock rotor

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheel size: 700c · Rims: MAVIC Ksyrium Pro Disc · Hubs: MAVIC Ksyrium Pro Disc · Front tire: MAVIC Yksion Pro GripLink 25, 700 x 25c (front); MAVIC Yksion Pro PowerLink 25, 700 x 23c (rear)

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.

Archived: Handlebar: 3T Ergosum Team Stealth carbon fiber, 77mm reach, 123mm drop, Ø31.8mm 51cm = 400mm 54cm = 420mm 56 - 61cm = 440mm · Stem: 3T ARX II Team Stealth w/ titanium bolts, +/-6° rise, Ø31.8mm 51cm = 80mm 54cm = 90mm 56cm = 100mm 58 - 61cm = 110mm · Seatpost: 3T Ionic VR 25 Team Stealth, Ø27.2mm, 350mm length · Saddle: Prologo Scratch 2 TiRox

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure. Look particularly closely for crushing, scoring or cracks at carbon handlebar clamp areas.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.