2015 Felt V110f

Archived: Frame: Felt Flatbar Road FLite Custom Butted aluminum, Hydroform TIG-welded construction, threaded BB, replaceable rear derailleur hanger, IS disc mount · Fork: Felt Flatbar Road Disc 6061 aluminum blades w/ IS mount disc tabs, 1.125" steer tube · Aluminum

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Shimano mix · Shifters: Shimano Altus Rapidfire Plus · Front derailleur: Shimano Altus clamp-on, Ø31.8mm · Rear derailleur: Shimano Acera · Crankset: SR/Suntour XCC 48/38/28T 43-51cm = 170mm 54-61cm = 175mm · Bottom bracket: FSA Square Tapered, 68 x 113mm · Rear cogs: Shimano,11-34T · Chain: KMC 8-speed

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Tektro RX1.0

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.

Archived: Wheel size: 700c · Rims: Felt Road RSL4 (tubeless ready), 22mm width, 22mm depth · Hubs: Felt R4, sealed bearing, 28H, Felt R4, sealed bearing, 28H, 8-speed · Front tire: Vittoria Zaffiro, 700 x 32c

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA NO.10, 1.125" sealed bearing w/ 25mm Cone Spacer, 3 x 5mm PC headset spacers, Felt top cap & steel bolt · Handlebar: Felt SuperLite Road, 10° sweep, Ø31.8mm 43-45cm = 580mm 51cm = 600mm 54-56cm = 620mm 58-61cm = 640mm · Stem: Felt SuperLite, +/-17° rise, Ø31.8mm 43-45cm = 80mm 51-54cm = 90mm 56-58cm = 100mm 61cm = 110mm · Seatpost: Felt SuperLite Road, Ø27.2mm, 330mm length · Saddle: Selle Royal Look In Athletic · Pedals: Fitness platform pedal

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.