2015 Felt F1 Frameset

Archived: 2015 Felt F1 Frameset · Road Double · Published sizes: 48, 51, 54, 56, 58, 61cm

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Carbon Fiber · Fork: Felt Race Road UHC Ultimate carbon fiber monocoque construction, ControlTaper 1.125" - 1.5" carbon fiber steer tube w/ integrated crown race, crown, blades & dropouts · Carbon Fiber

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

• Sight along the frame and fork from several directions. Confirm the fork, rear dropouts, head tube and other visible interfaces appear straight and symmetrical.
• Use professional alignment tools when crash history, wheel tracking, dropout position or bearing alignment cannot be established visually.

• Inspect threaded shells, bearing seats, axle interfaces and the derailleur hanger for corrosion, stripped threads, cracks, distortion or tool damage.
• Check the seatpost bore, seat clamp, bonded inserts, cable ports, guides and frame plugs for damage or missing hardware.
• Identify and measure every interface rather than assuming a standard from model name or appearance. Confirm replacement parts remain available before purchase.

• List every included part and small fitting, including axles, headset pieces, seat clamps, derailleur hangers, cable guides, frame plugs, suspension hardware and proprietary covers.
• Inspect threaded, pressed, clamped and bonded interfaces for corrosion, cracks, distortion, stripped threads, tool damage or improvised repairs.
• If damage, alignment or compatibility is uncertain, have the bare frameset inspected and measured by a qualified bicycle mechanic before choosing components.