Ratio2.75:1
Estimated speed At 90 RPM
Gear
Rear tire: 20×1.75.
Velopedia Bicycle Archive
2001 Diamondback Reactor
Original specifications: 20" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #36055- Model year
- 2001
- Category
- BMX
- Original MSRP
- $429.99
- Sizes
- Pro
- Colors
- Black Eye Blue
- Geometry
- Legacy reference
- In this record
- 21 specifications · archived image · original MSRP · geometry
Model history 5 other years
Browse other years
Compare side by side
Identification clues
2001 archived details
- Published colors
- Black Eye Blue
- Frame
- 7005 aluminum
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · 20" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Diamondback RMX |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Crankset | 3-piece chromoly 180mm, 44 teeth |
|---|---|
| Bottom Bracket | Sealed |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC HP-20, 1/2 x 3/32" |
| Pedals | Aluminum platform |
Brakes
| Brakes | Tektro 920A rear brakes, Tektro 311A rear levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tange Seiki TG-3 |
|---|---|
| Handlebar | Chromoly BMX |
| Handlebar Extensions | Not included |
| Stem | Aluminum |
| Saddle | RMX padded |
| Seatpost | Aluminum micro-adjust, 27.0mm diameter |
Wheels & Tires
| Hubs | RMX aluminum sealed bearing |
|---|---|
| Rims | Alex X-303, 36-hole |
| Front Tire | 20 x 2.125" Tioga Comp III |
| Rear Tire | 20 x 1.75" Tioga Comp III |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 4 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 533.4 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 71° |
| Chainstay / rear center | 381 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Aluminum micro-adjust
27.0mm diameter
Alex X-303
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 2.125" Tioga Comp III, Rear: 20 x 1.75" Tioga Comp III
- Drivetrain
- 1-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- Sealed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Diamondback RMX · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Crankset: 3-piece chromoly 180mm, 44 teeth · Bottom bracket: Sealed · Rear cogs: 1-speed, 16 teeth · Chain: KMC HP-20, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro 920A rear brakes, Tektro 311A rear levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: Alex X-303, 36-hole · Hubs: RMX aluminum sealed bearing · Front tire: Front: 20 x 2.125" Tioga Comp III, Rear: 20 x 1.75" Tioga Comp III
Controls and contact points
Archived: Headset: 1 1/8" threadless Tange Seiki TG-3 · Handlebar: Chromoly BMX · Stem: Aluminum · Seatpost: Aluminum micro-adjust, 27.0mm diameter · Saddle: RMX padded · Pedals: Aluminum platform
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Same model · another year
Reactor
Same model · another year
Reactor
Same brand and year
Assault T1
Same brand and year
Assault T2
- Frame
- Chromoly
- Brakes
- Dia-Compe 990 rear brakes, Dia-Compe Tech 99 rear levers
Same category and period
DirtMaster Big Bertha
- Frame
- 6061 T6 aluminum
- Brakes
- Tektro linear-pull rear brakes, Tektro linear-pull rear levers
Same category and period
Alliant Blur XL
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.