Uses front tire 700C×23; rear size isn’t listed.
Velopedia Bicycle Archive
2003 Devinci Santiago
Original specifications: Shimano Ultegra · 9-speed · mechanical rear derailleur · 700c wheels · 19.8 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #30663- Model year
- 2003
- Category
- Road
- Sizes
- XS, S, M, L
- Weight
- 19.8 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · geometry
Model history 3 other years
Browse other years
Compare side by side
Identification clues
2003 archived details
- Frame
- 6061 T6 aluminum, carbon stays
- Original equipment
- Flatbar Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061 T6 aluminum, carbon stays · Flatbar Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061 T6 aluminum, carbon stays |
| Fork | Columbus Carve |
| Fork Material | Carbon fiber, aero crown |
Drivetrain
| Component Group | Flatbar Mix |
|---|---|
| Shifters | Shimano SL-R660 Flat Bar |
| Front Derailleur | Shimano FD-R443, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Ultegra |
| Crankset | Shimano Ultegra, 30/42/52 teeth |
| Bottom Bracket | Shimano BB-5500, 118mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 9-speed, 12 - 26 teeth |
| Chain | Shimano CN-HG93, 1/2 x 3/32" |
| Pedals | Shimano PD-M505 SPD |
Brakes
| Brakes | Shimano Ultegra Dual Pivot brakes, Shimano BL-R440 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" integrated Tien Hsin No.16 |
|---|---|
| Handlebar | Ritchey Straight Comp |
| Handlebar Extensions | Not included |
| Stem | Ritchey Pro |
| Saddle | Selle Italia XO Trans Am |
| Seatpost | Ritchey Pro, 27.2mm diameter |
Wheels & Tires
| Hubs | Gipiemme Tecno |
|---|---|
| Rims | Gipiemme Tecno 024 |
| Spokes | Gipiemme |
| Front Tire | 700 x 23c Michelin Axial Carbon |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 560 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73.5° |
| Chainstay / rear center | 410 mm |
| Wheelbase | 995 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
27.2mm diameter
More parts (8)Fewer parts
118mm spindle
30/42/52 teeth
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c Michelin Axial Carbon
- Drivetrain
- 9-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Shimano BB-5500, 118mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Columbus Carve · Carbon fiber, aero crown
Drivetrain
Check drivetrain wear →Archived: Group: Flatbar Mix · Shifters: Shimano SL-R660 Flat Bar · Front derailleur: Shimano FD-R443, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Ultegra · Crankset: Shimano Ultegra, 30/42/52 teeth · Bottom bracket: Shimano BB-5500, 118mm spindle · Rear cogs: 9-speed, 12 - 26 teeth · Chain: Shimano CN-HG93, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Ultegra Dual Pivot brakes, Shimano BL-R440 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Gipiemme Tecno 024 · Hubs: Gipiemme Tecno · Front tire: 700 x 23c Michelin Axial Carbon
Controls and contact points
Archived: Headset: 1 1/8" integrated Tien Hsin No.16 · Handlebar: Ritchey Straight Comp · Stem: Ritchey Pro · Seatpost: Ritchey Pro, 27.2mm diameter · Saddle: Selle Italia XO Trans Am · Pedals: Shimano PD-M505 SPD
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




