Uses front tire 700C×37; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Devinci Monaco
Original specifications: Shimano Deore drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #90467- Model year
- 2000
- Category
- Hybrid
- Original MSRP
- $699.00
- Sizes
- S, M, L, XL
- Colors
- White/Blue
- Geometry
- Legacy reference
- In this record
- 27 specifications · original MSRP · geometry
Model history 5 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- White/Blue
- Frame
- 6061-T6 aluminum w/replaceable derailleur hanger
- Original equipment
- Shimano Deore
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6061-T6 aluminum w/replaceable derailleur hanger · Shimano Deore · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6061-T6 aluminum w/replaceable derailleur hanger |
| Fork | OMC 820 |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano Deore |
|---|---|
| Shifters | Shimano Alivio RapidFire Plus |
| Front Derailleur | Shimano Nexave top-swing, top-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Deore XT SGS |
| Crankset | Shimano Nexave, 28/38/48 teeth |
| Bottom Bracket | Shimano BB-UN52, 110mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 11 - 30 teeth |
| Chain | Shimano CN-IG51, 1/2 x 3/32" |
| Pedals | Shimano PD-M434 SPD |
Brakes
| Brakes | Shimano Deore V-Brake brakes, Shimano Deore levers |
|---|
Cockpit & Contact Points
| Headset | 1" threadless Ritchey Scuzzy Logic Comp |
|---|---|
| Handlebar | Ritchey Force |
| Handlebar Extensions | Not included |
| Stem | Titec Miller |
| Saddle | Selle Italia Avantgarde 2 |
| Seatpost | Titec AL-235, 27.2mm diameter |
Wheels & Tires
| Hubs | Shimano Deore |
|---|---|
| Rims | Mavic T221, 36-hole |
| Spokes | DT stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 37c Michelin Cyclocross Sprint |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 563.9 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 457.2 mm |
| Wheelbase | 1069.3 mm |
| Fork offset / rake | 40 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
1/2 x 3/32"
27.2mm diameter
More parts (11)Fewer parts
Shimano Deore levers
110mm spindle
28/38/48 teeth
36-hole
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 37c Michelin Cyclocross Sprint
- Drivetrain
- 8-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Shimano BB-UN52, 110mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: OMC 820 · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Deore · Shifters: Shimano Alivio RapidFire Plus · Front derailleur: Shimano Nexave top-swing, top-pull/clamp-on 31.8mm · Rear derailleur: Shimano Deore XT SGS · Crankset: Shimano Nexave, 28/38/48 teeth · Bottom bracket: Shimano BB-UN52, 110mm spindle · Rear cogs: 8-speed, 11 - 30 teeth · Chain: Shimano CN-IG51, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Deore V-Brake brakes, Shimano Deore levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Mavic T221, 36-hole · Hubs: Shimano Deore · Front tire: 700 x 37c Michelin Cyclocross Sprint
Controls and contact points
Archived: Headset: 1" threadless Ritchey Scuzzy Logic Comp · Handlebar: Ritchey Force · Stem: Titec Miller · Seatpost: Titec AL-235, 27.2mm diameter · Saddle: Selle Italia Avantgarde 2 · Pedals: Shimano PD-M434 SPD
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

