Uses front tire 700C×28; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Co-Motion Cappuccino
Original specifications: Shimano Deore XT · 9-speed · mechanical rear derailleur · 700c wheels · 38.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #90553- Model year
- 2000
- Category
- Tandem
- Original MSRP
- $3,490.00
- Sizes
- Captain 21"/stoker 18", captain 22"/stoker 19", captain 23"/stoker 20"
- Colors
- Black, Blue, Green metallic, Orange, Purple pearl
- Weight
- 38.5 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · original MSRP · geometry
Model history 8 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Black, Blue, Green metallic, Orange, Purple pearl
- Frame
- Reynolds tandem specific double butted chromoly
- Original equipment
- Tandem Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildReynolds tandem specific double butted chromoly · Tandem Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Reynolds tandem specific double butted chromoly |
| Fork | Co-Motion Tandem |
| Fork Material | 4130 chromoly, unicrown crown |
Drivetrain
| Component Group | Tandem Mix |
|---|---|
| Shifters | Shimano Dura-Ace bar-end |
| Front Derailleur | Shimano Ultegra, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano Deore XT SGS |
| Crankset | Race Face Tandem, 54/44/32 teeth |
| Bottom Bracket | Shimano BB-UN52, 110mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 9-speed, 11 - 32 teeth |
| Chain | Shimano CN-HG92, 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Avid 1D-25 brakes, Dia-Compe 287-V levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless RaceFace Thermo SP |
|---|---|
| Handlebar | Profile Hammer |
| Stem | Salsa Moto Ace |
| Saddle | Co-Motion Dual Density |
| Seatpost | Zoom micro-adjust, 29.8mm diameter |
Wheels & Tires
| Hubs | Front: Phil Wood, Rear: Phil Wood Tandem |
|---|---|
| Rims | Velocity Diad |
| Spokes | DT stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 28c Avocet Fast Grip |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 4 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 552.4 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
110mm spindle
More parts (7)Fewer parts
54/44/32 teeth
29.8mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 28c Avocet Fast Grip
- Drivetrain
- 9-speed
- Seatpost diameter
- 29.8 mm
- Bottom bracket / shell
- Shimano BB-UN52, 110mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Co-Motion Tandem · 4130 chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Tandem Mix · Shifters: Shimano Dura-Ace bar-end · Front derailleur: Shimano Ultegra, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Deore XT SGS · Crankset: Race Face Tandem, 54/44/32 teeth · Bottom bracket: Shimano BB-UN52, 110mm spindle · Rear cogs: 9-speed, 11 - 32 teeth · Chain: Shimano CN-HG92, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Avid 1D-25 brakes, Dia-Compe 287-V levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Velocity Diad · Hubs: Front: Phil Wood, Rear: Phil Wood Tandem · Front tire: 700 x 28c Avocet Fast Grip
Controls and contact points
Archived: Headset: 1 1/8" threadless RaceFace Thermo SP · Handlebar: Profile Hammer · Stem: Salsa Moto Ace · Seatpost: Zoom micro-adjust, 29.8mm diameter · Saddle: Co-Motion Dual Density · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
