Lowest1.15:1
Highest4.17:1
Total range361%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×25; rear size isn’t listed.
Velopedia Bicycle Archive
2010 Cannondale CAAD8 6 Triple
Original specifications: Shimano Tiagra · 9-speed rear derailleur · 700c wheels.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #20548- Model year
- 2010
- Category
- Road
- Original MSRP
- $1,059.00
- Sizes
- 48cm, 51cm, 54cm, 56cm, 58cm, 61cm
- Colors
- Nu Team Blue/Magnesium White, Race Red/Jet Black
- In this record
- 25 specifications · original MSRP
Original buildCAAD8 S Double Butted 6061 Alloy · Road Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | CAAD8 S Double Butted 6061 Alloy |
| Fork | Cannondale Slice Ultra |
| Fork Material | Carbon, aero crown |
Drivetrain
| Component Group | Road Mix |
|---|---|
| Shifters | Shimano Tiagra |
| Front Derailleur | Shimano Sora, 34.9mm clamp |
| Rear Derailleur | Shimano Tiagra |
| Crankset | Shimano Sora Triple, 50/39/30 teeth |
| Bottom Bracket | Shimano Sora |
| Cassette | SRAM PG-950 |
| Rear Cogs | 9-speed, 12 - 26 teeth |
| Chain | KMC 9-speed |
Brakes
| Brakes | Cannondale C4 brakes, Shimano Tiagra levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" integrated Tange |
|---|---|
| Handlebar | Cannondale C4 |
| Handlebar Extensions | Not included |
| Stem | Cannondale C4 |
| Saddle | Cannondale Ergo Performance |
| Seatpost | Cannondale C3 Carbon-wrapped, 31.6mm diameter |
Wheels & Tires
| Hubs | Front: Formula RB-51, Rear: Formula RB-52 |
|---|---|
| Rims | Maddux DRX 4000, 32-hole |
| Spokes | Stainless steel |
| Front Tire | 700 x 25c Vittoria Zaffiro |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
700 x 25c Vittoria Zaffiro
Retailer offers
Vittoria Zaffiro Pro V Clincher Tire Black, 700x25
700x25c
Model match
Other replacement options (1)
Vittoria Zaffiro V Wire Bead Tire Black, 700x25
700x25c
Model match
Vittoria Zaffiro on eBaySponsored links
Cannondale C3 Carbon-wrapped
31.6mm diameter
Retailer offers
FSA Gossamer SB20 Seatpost Black, 31.6mm, 350mm
Replacement option
KMC 9-speed
Replacement search: 9-speed bicycle chain Before ordering: Check chain width and length.
More parts (6)Fewer parts
Shimano Sora
Shimano Sora Triple
50/39/30 teeth
Shimano Sora
34.9mm clamp
Shimano Tiagra
Shimano Tiagra
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 25c Vittoria Zaffiro
- Drivetrain
- 9-speed
- Seatpost diameter
- 31.6 mm
- Bottom bracket / shell
- Shimano Sora
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Cannondale Slice Ultra · Carbon, aero crown
Drivetrain
Check drivetrain wear →Archived: Group: Road Mix · Shifters: Shimano Tiagra · Front derailleur: Shimano Sora, 34.9mm clamp · Rear derailleur: Shimano Tiagra · Crankset: Shimano Sora Triple, 50/39/30 teeth · Bottom bracket: Shimano Sora · Cassette: SRAM PG-950 · Rear cogs: 9-speed, 12 - 26 teeth · Chain: KMC 9-speed
Brakes
Inspect the brakes →Archived: Brakes: Cannondale C4 brakes, Shimano Tiagra levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Maddux DRX 4000, 32-hole · Hubs: Front: Formula RB-51, Rear: Formula RB-52 · Front tire: 700 x 25c Vittoria Zaffiro
Controls and contact points
Archived: Headset: 1 1/8" integrated Tange · Handlebar: Cannondale C4 · Stem: Cannondale C4 · Seatpost: Cannondale C3 Carbon-wrapped, 31.6mm diameter · Saddle: Cannondale Ergo Performance
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Same brand and year
CAAD8 6 Compact
Specifications
- Frame
- CAAD8 S Double Butted 6061 Alloy
- Groupset
- Shimano 2300 Mix
Same brand and year
CAAD8 8 Compact
Same category and period
Felt AR3
Same category and period
Felt AR2
Same category and period
Felt AR4
Specifications
- Frame
- 6061 Alloy
- Groupset
- Shimano Tiagra Mix
Same category and period
Bianchi C2C Via Nirone 7 Tiagra
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.