Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
2002 Cannondale Jekyll 3000
Original specifications: Shimano XTR · 9-speed · mechanical rear derailleur · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #37143- Model year
- 2002
- Category
- Mountain
- Original MSRP
- $3,962.99
- Sizes
- S, M, L, XL
- Colors
- Ball Burnished Aluminum
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 3 other years
Browse other years
Compare side by side
Identification clues
2002 archived details
- Published colors
- Ball Burnished Aluminum
- Frame
- 6013 T6 aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build6013 T6 aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6013 T6 aluminum |
| Fork | HeadShok Lefty ELO |
| Fork Material | Aluminum, double double-clamp crown |
| Rear Shock | Fox Float RL |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano XT RapidFire SL |
| Front Derailleur | Shimano XT |
| Rear Derailleur | Shimano XTR SGS |
| Crankset | Cannondale CX3, 22/32/44 teeth |
| Bottom Bracket | Shimano BB-ES72, 109.5mm spindle |
| Rear Cogs | 9-speed, 11 - 34 teeth |
| Chain | 1/2 x 3/32" |
| Pedals | Shimano clipless |
Brakes
| Brakes | Hayes HFX Magnesium Hydraulic brakes, Hayes Hydraulic Disc levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/2" Cannondale HeadShok SI |
|---|---|
| Handlebar | Syntace VRO |
| Handlebar Extensions | Not included |
| Stem | Syntace VRO |
| Saddle | Fi'zi:k Plateau, titanium rails |
| Seatpost | Cannondale Competition |
Wheels & Tires
| Hubs | Front: Cannondale Lefty, Rear: DT Swiss 240 |
|---|---|
| Rims | Mavic X 3.1, 24-hole |
| Spokes | DT stainless steel, double-butted |
| Spoke Nipples | Aluminum nipples |
| Front Tire | 26 x 2.10" Hutchinson Scorpion Tubeless |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 3 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 597 mm |
| Chainstay / rear center | 422 mm |
| Wheelbase | 1087 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
109.5mm spindle
titanium rails
More parts (3)Fewer parts
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" Hutchinson Scorpion Tubeless
- Drivetrain
- 9-speed
- Bottom bracket / shell
- Shimano BB-ES72, 109.5mm spindle
Equipment inspection checks 14 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: HeadShok Lefty ELO · Aluminum, double double-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: HeadShok Lefty ELO · Rear shock: Fox Float RL
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano XT RapidFire SL · Front derailleur: Shimano XT · Rear derailleur: Shimano XTR SGS · Crankset: Cannondale CX3, 22/32/44 teeth · Bottom bracket: Shimano BB-ES72, 109.5mm spindle · Rear cogs: 9-speed, 11 - 34 teeth · Chain: 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Hayes HFX Magnesium Hydraulic brakes, Hayes Hydraulic Disc levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Mavic X 3.1, 24-hole · Hubs: Front: Cannondale Lefty, Rear: DT Swiss 240 · Front tire: 26 x 2.10" Hutchinson Scorpion Tubeless
Controls and contact points
Archived: Headset: 1 1/2" Cannondale HeadShok SI · Handlebar: Syntace VRO · Stem: Syntace VRO · Seatpost: Cannondale Competition · Saddle: Fi'zi:k Plateau, titanium rails · Pedals: Shimano clipless
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




