2011 Breezer Power Trip IG

Archived: Frame: TIG-welded · Fork: Suntour SF11-CR-8V V3, 50mm travel · Single

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.

Archived: Fork: Suntour SF11-CR-8V V3, 50mm travel

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Group: Commuter Mix · Shifters: Shimano Revo · Crankset: Breezer alloy, 42T teeth · Bottom bracket: VP BC-73 · Cassette: Cog · Rear cogs: 1-speed, 18 teeth · Chain: KMC Z410

• Check chain tension and chainline, rotate the drivetrain through a full revolution and confirm the rear axle or tensioning hardware cannot slip.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Tektro 855AL V-brake brakes, Tektro EL-520-TS levers

• Inspect pads, cables and housings, then examine both rim braking surfaces for concavity, cracking or heavy wear. Confirm each caliper returns and centers correctly.

Archived: Wheel size: 700c wheels · Rims: Alex DH19, 36-hole · Hubs: Front: 250W electric motor, Rear: Shimano Nexus 8 · Front tire: 700 x 38c Vittoria E-Rando

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.

Archived: Headset: 1 1/8" threaded VP MH308E · Handlebar: Breezer low rise alloy · Stem: Breezer adjustable alloy quill · Seatpost: Breezer Alloy, 30.2mm diameter · Saddle: Breezer w/memory foam · Pedals: Wellgo C32 alloy body w/kraton top, CroMo spindle

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.