Velopedia Bicycle Archive
1998 BikeE All Around CT21
Original specifications: Sachs Centera drivetrain · Front: 16", Rear: 20" wheels · 29 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #79445- Model year
- 1998
- Category
- Recumbent
- Original MSRP
- $925.00
- Sizes
- Adjustable for rider height
- Colors
- Black anodized, Blue Anodized, Red Anodized, Violet Anodized
- Weight
- 29 lb
- In this record
- 24 specifications · original MSRP
Original build6005 T5 box section aluminum · Sachs Centera · Front: 16", Rear: 20" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 6005 T5 box section aluminum |
| Fork | BikeE |
| Fork Material | 4130 chromoly, sloping crown |
Drivetrain
| Component Group | Sachs Centera |
|---|---|
| Shifters | Sachs Power Grip Plus |
| Rear Derailleur | Sachs Centera |
| Crankset | Dotek aluminum, 46 teeth |
| Bottom Bracket | Shimano BB-UN52, 118mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Victor VP-988 |
Brakes
| Brakes | Chang Star 879AG front/Tektro linear-pull rear rear brakes, Tektro RBP-366A levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/4" threadless Aheadset Kontak SA-2 |
|---|---|
| Handlebar | BikeE |
| Saddle | BikeE contour custom, mesh back, stainless steel rail |
Wheels & Tires
| Hubs | Front: Shimano STX, Rear: Sachs Centera |
|---|---|
| Rims | Rigida 20x, 16-hole/36-hole |
| Spokes | Sapim stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 16 x 1.50" Primo |
| Rear Tire | 20 x 1.75" Primo |
| Wheel Size | Front: 16", Rear: 20" wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Speed unavailable: wheel or tire size is missing or unclear.
Add your rear tire size to calculate speedHow it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
118mm spindle
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 16 x 1.50" Primo, Rear: 20 x 1.75" Primo
- Drivetrain
- 7-speed
- Bottom bracket / shell
- Shimano BB-UN52, 118mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: BikeE · 4130 chromoly, sloping crown
Drivetrain
Check drivetrain wear →Archived: Group: Sachs Centera · Shifters: Sachs Power Grip Plus · Rear derailleur: Sachs Centera · Crankset: Dotek aluminum, 46 teeth · Bottom bracket: Shimano BB-UN52, 118mm spindle · Rear cogs: 7-speed, 11 - 28 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Chang Star 879AG front/Tektro linear-pull rear rear brakes, Tektro RBP-366A levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: Front: 16", Rear: 20" wheels · Rims: Rigida 20x, 16-hole/36-hole · Hubs: Front: Shimano STX, Rear: Sachs Centera · Front tire: Front: 16 x 1.50" Primo, Rear: 20 x 1.75" Primo
Controls and contact points
Archived: Headset: 1 1/4" threadless Aheadset Kontak SA-2 · Handlebar: BikeE · Saddle: BikeE contour custom, mesh back, stainless steel rail · Pedals: Victor VP-988
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
