Uses front tire 700C×30; rear size isn’t listed.
Velopedia Bicycle Archive
1998 Bianchi Volpe
Original specifications: Shimano RSX drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #75881- Model year
- 1998
- Category
- Touring
- Original MSRP
- $619.00
- Sizes
- 49 cm, 52 cm, 55 cm, 58 cm, 61 cm
- Colors
- Blue sapphire
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 14 other years
Browse other years
Compare side by side
Identification clues
1998 archived details
- Published colors
- Blue sapphire
- Frame
- Chromoly, double-butted
- Original equipment
- Shimano RSX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly, double-butted · Shimano RSX · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly, double-butted |
| Fork | Akisu |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano RSX |
|---|---|
| Shifters | Shimano RSX STI Dual Control |
| Front Derailleur | Shimano RSX top-swing, bottom-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano RSX GS |
| Crankset | Shimano RSX, 26/36/46 teeth |
| Bottom Bracket | Shimano BB-LP26, 118mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | Shimano CN-HG50, 1/2 x 3/32" |
| Pedals | HTI steel/resin w/clips & straps |
Brakes
| Brakes | Shimano Alivio M-System brakes, Shimano RSX levers |
|---|
Cockpit & Contact Points
| Headset | 1" Tien Hsin TH-390 |
|---|---|
| Handlebar | Nitto drop aluminum |
| Stem | Alico YC chromoly |
| Saddle | In Motion HFS |
| Seatpost | Kalloy SP-242, 26.6mm diameter |
Wheels & Tires
| Hubs | Shimano RSX |
|---|---|
| Rims | Mavic MA-2, 36-hole |
| Spokes | Chung Nan stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 30c Ritchey Tom Slick |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 545 mm |
| Head-tube angle | 72° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 430 mm |
| Wheelbase | 1024 mm |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts

Vittoria Zaffiro Pro V Clincher Tire Black, 700x30
700x30c
Replacement option
Other replacement options (1)

Challenge Strada Bianca Pro Tubeless Tire Tan, 700x30
700x30c
Replacement option
118mm spindle
More parts (4)Fewer parts
26/36/46 teeth
26.6mm diameter
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 30c Ritchey Tom Slick
- Drivetrain
- 7-speed
- Seatpost diameter
- 26.6 mm
- Bottom bracket / shell
- Shimano BB-LP26, 118mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Akisu · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano RSX · Shifters: Shimano RSX STI Dual Control · Front derailleur: Shimano RSX top-swing, bottom-pull/clamp-on 28.6mm · Rear derailleur: Shimano RSX GS · Crankset: Shimano RSX, 26/36/46 teeth · Bottom bracket: Shimano BB-LP26, 118mm spindle · Rear cogs: 7-speed, 11 - 28 teeth · Chain: Shimano CN-HG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Alivio M-System brakes, Shimano RSX levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Mavic MA-2, 36-hole · Hubs: Shimano RSX · Front tire: 700 x 30c Ritchey Tom Slick
Controls and contact points
Archived: Headset: 1" Tien Hsin TH-390 · Handlebar: Nitto drop aluminum · Stem: Alico YC chromoly · Seatpost: Kalloy SP-242, 26.6mm diameter · Saddle: In Motion HFS · Pedals: HTI steel/resin w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
