Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
1996 Bianchi Advantange
Original specifications: 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #51759- Model year
- 1996
- Category
- Hybrid
- Original MSRP
- $369.99
- Sizes
- 16.5", 18.5", 20.5", 22", womens 16.5", womens 19.5"
- Colors
- Dark blue, Green
- Geometry
- Legacy reference
- In this record
- 25 specifications · original MSRP · geometry
Original buildTange chromoly · 700c wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Tange chromoly |
| Fork | Bianchi |
| Fork Material | Chromoly, butted, forged dropouts, unicrown crown |
Drivetrain
| Shifters | Grip Shift SRT-400 |
|---|---|
| Front Derailleur | Shimano AceraX top-swing, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano Alivio |
| Crankset | Shimano AceraX, 24/34/42 teeth |
| Bottom Bracket | Shimano BB-LP26, 110 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 14 - 28 teeth |
| Chain | KMC HG-50, 1/2 x 3/32" |
| Pedals | Victor VP-893N |
Brakes
| Brakes | Shimano Altus brakes, Chang Star 274A levers |
|---|
Cockpit & Contact Points
| Headset | 1" Tien Hsin TH-390 |
|---|---|
| Handlebar | MTB steel |
| Handlebar Extensions | Not included |
| Stem | MTB 340-1 |
| Saddle | Velo Plush |
| Seatpost | Kalloy SP-242, 26.6 mm diameter |
Wheels & Tires
| Rims | Araya TX-350, 36-hole |
|---|---|
| Spokes | Stainless steel, 2.0mm |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Cheng Shin C-1053 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 550 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 430 mm |
| Wheelbase | 1052 mm |
| Fork offset / rake | 52 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 3/32"
110 mm spindle
More parts (3)Fewer parts
24/34/42 teeth
26.6 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Cheng Shin C-1053
- Drivetrain
- 7-speed
- Seatpost diameter
- 26.6 mm
- Bottom bracket / shell
- Shimano BB-LP26, 110 mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Bianchi · Chromoly, butted, forged dropouts, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Shifters: Grip Shift SRT-400 · Front derailleur: Shimano AceraX top-swing, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano Alivio · Crankset: Shimano AceraX, 24/34/42 teeth · Bottom bracket: Shimano BB-LP26, 110 mm spindle · Rear cogs: 7-speed, 14 - 28 teeth · Chain: KMC HG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Altus brakes, Chang Star 274A levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya TX-350, 36-hole · Front tire: 700 x 38c Cheng Shin C-1053
Controls and contact points
Archived: Headset: 1" Tien Hsin TH-390 · Handlebar: MTB steel · Stem: MTB 340-1 · Seatpost: Kalloy SP-242, 26.6 mm diameter · Saddle: Velo Plush · Pedals: Victor VP-893N
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.