Uses front tire 700C×28; rear size isn’t listed.
Velopedia Bicycle Archive
1993 Bianchi Europa
Original specifications: Shimano Altus A10 drivetrain · 700c wheels · 24.4 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #42977- Model year
- 1993
- Category
- Road
- Original MSRP
- $525.00
- Sizes
- 18, 18.9, 19.7, 20.4, 21.3, 22, 22.8, 23.6, 24.4
- Weight
- 24.4 lb
- Geometry
- Legacy reference
- In this record
- 20 specifications · original MSRP · geometry
Original buildTange Infinity/Bianchi Superset-2 · Shimano Altus A10 · 700c wheels
Frameset
| Frame Construction | Lugged steel |
|---|---|
| Frame Material | Tange Infinity/Bianchi Superset-2 |
| Fork | Spinner SPT-848 chrome-moly |
Drivetrain
| Component Group | Shimano Altus A10 |
|---|---|
| Shifters | Shimano 400EX downtube |
| Front Derailleur | Shimano Altus A10 |
| Rear Derailleur | Shimano Altus A10 |
| Crankset | Shimano Altus A10, 30/40/50 teeth |
| Rear Cogs | 7-speed, 13 - 28 teeth |
| Chain | Shimano CN-HG50 |
| Pedals | Wellgo alloy LU-875 w/toe clips and straps |
Brakes
| Brakes | Shimano Exage 300EX brakes, levers |
|---|
Cockpit & Contact Points
| Handlebar | Sakae CMB-200 with Modolo bend |
|---|---|
| Stem | Nitto Dynamic-2 90 degree, alloy |
| Saddle | Bianchi racing |
| Seatpost | Kalloy SP-242 microadjust |
Wheels & Tires
| Hubs | Shimano alloy |
|---|---|
| Rims | Araya SS-45, 32-hole |
| Front Tire | 700 x 28c Bianchi Advantage-SL |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 566.4 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 419.1 mm |
| Wheelbase | 1008.4 mm |
| Fork offset / rake | 44.4 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
More parts (5)Fewer parts
30/40/50 teeth
alloy
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 28c Bianchi Advantage-SL
- Drivetrain
- 7-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Lugged steel · Fork: Spinner SPT-848 chrome-moly
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Altus A10 · Shifters: Shimano 400EX downtube · Front derailleur: Shimano Altus A10 · Rear derailleur: Shimano Altus A10 · Crankset: Shimano Altus A10, 30/40/50 teeth · Rear cogs: 7-speed, 13 - 28 teeth · Chain: Shimano CN-HG50
Brakes
Inspect the brakes →Archived: Brakes: Shimano Exage 300EX brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya SS-45, 32-hole · Hubs: Shimano alloy · Front tire: 700 x 28c Bianchi Advantage-SL
Controls and contact points
Archived: Handlebar: Sakae CMB-200 with Modolo bend · Stem: Nitto Dynamic-2 90 degree, alloy · Seatpost: Kalloy SP-242 microadjust · Saddle: Bianchi racing · Pedals: Wellgo alloy LU-875 w/toe clips and straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.