Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
1997 Barracuda A2B
Original specifications: Grip Shift/Shimano STX drivetrain · 26" wheels · 25.9 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #66653- Model year
- 1997
- Category
- Mountain
- Original MSRP
- $549.95
- Sizes
- 10", 12", 14", 16", 18", 19"
- Colors
- Teal flake/Audi pearl
- Weight
- 25.9 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 4 other years
Browse other years
Compare side by side
Identification clues
1997 archived details
- Published colors
- Teal flake/Audi pearl
- Frame
- 7005 aluminum
- Original equipment
- Grip Shift/Shimano STX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Grip Shift/Shimano STX · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Barracuda Straight Blade |
| Fork Material | 4130 chromoly, unicrown crown |
Drivetrain
| Component Group | Grip Shift/Shimano STX |
|---|---|
| Shifters | Grip Shift ESP 500 |
| Front Derailleur | Shimano STX top-swing, top-pull/clamp-on 35.0 mm |
| Rear Derailleur | Grip Shift ESP 5.0 |
| Crankset | Sugino Impel 300, 22/34/42 teeth |
| Bottom Bracket | YST BB 969, 113 mm spindle |
| BB Shell Width | 73mm English |
| Rear Cogs | 8-speed, 11 - 28 teeth |
| Chain | Sachs SC-20, 1/2 x 3/32" |
| Pedals | Wellgo LU-933A w/clips & straps |
Brakes
| Brakes | Shimano Alivio A-brake brakes, Dia-Compe PC-7 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless YST CS558 |
|---|---|
| Handlebar | JY 230HB aluminum |
| Handlebar Extensions | Cuda one-piece aluminum |
| Stem | Kalloy aluminum |
| Saddle | Vetta TT Tri-Shock, manganese rails |
| Seatpost | Polygon PM-312, 31.6 mm diameter |
Wheels & Tires
| Hubs | Front: Shimano Deore LX, Rear: Shimano R080, silent clutch |
|---|---|
| Rims | Rigida LASER, 32-hole |
| Spokes | Richman stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.95" Hutchinson On The Rocks |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 571 mm |
| Head-tube angle | 70.5° |
| Seat-tube angle | 73.5° |
| Chainstay / rear center | 416 mm |
| Wheelbase | 1060 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
31.6 mm diameter

FSA Gossamer SB20 Seatpost Black, 31.6mm, 350mm
Replacement option
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Hutchinson On The Rocks
- Drivetrain
- 8-speed
- Seatpost diameter
- 31.6 mm
- Bottom bracket / shell
- YST BB 969, 113 mm spindle · 73mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Barracuda Straight Blade · 4130 chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Grip Shift/Shimano STX · Shifters: Grip Shift ESP 500 · Front derailleur: Shimano STX top-swing, top-pull/clamp-on 35.0 mm · Rear derailleur: Grip Shift ESP 5.0 · Crankset: Sugino Impel 300, 22/34/42 teeth · Bottom bracket: YST BB 969, 113 mm spindle · Rear cogs: 8-speed, 11 - 28 teeth · Chain: Sachs SC-20, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Alivio A-brake brakes, Dia-Compe PC-7 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Rigida LASER, 32-hole · Hubs: Front: Shimano Deore LX, Rear: Shimano R080, silent clutch · Front tire: 26 x 1.95" Hutchinson On The Rocks
Controls and contact points
Archived: Headset: 1 1/8" threadless YST CS558 · Handlebar: JY 230HB aluminum · Stem: Kalloy aluminum · Seatpost: Polygon PM-312, 31.6 mm diameter · Saddle: Vetta TT Tri-Shock, manganese rails · Pedals: Wellgo LU-933A w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



