Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2007 KHS Alite 100 and 2006 KHS Alite 100.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2; rear size isn’t listed.
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2007 KHS Alite 100
2006 KHS Alite 100
Overview
Model Year
2007
2006
Brand
KHS
KHS
Model
Alite 100
Alite 100
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
Not documented
$269.00
Colors
Red
Blue
Sizes
15", 17", 19", 21"
15", 17", 19", 21"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
7005 aluminum
Fork
Mozo M-30A, 76mm travel
Mozo M30, 65mm
Fork Material
Aluminum/steel, single crown
—
Drivetrain
Component Group
Shimano mix
Shimano mix
Shifters
Shimano Revo
SRAM MRX
Front Derailleur
Shimano FD-C051
Shimano FD-TZ31TM6
Rear Derailleur
Shimano RD-TX30
Shimano RD-TX30
Crankset
Shimano FC-TX71, 28/38/48 teeth
Shimano FC-TX71 w/o CG, 28/38/48 teeth
Bottom Bracket
VP-B33
VP-B33 w/bolted axle
BB Shell Width
—
68mm English
Rear Cogs
7-speed, 14 - 28 teeth
7-speed, 14 - 28 teeth
Chain
KMC Z51
KMC Z51, 1/2 x 3/32"
Pedals
VP MTB
VP MTB w/boron axle
Brakes
Brakes
Tektro linear-pull brakes, Alloy levers
Tektro linear-pull brakes, APSE 428D alloy levers
Cockpit & Contact Points
Headset
1 1/8" threadless VP-71
1 1/8" threadless VP-71
Handlebar
30mm Rise
Steel 30mm rise
Handlebar Extensions
Not included
—
Stem
25 Degree 4-Bolt
MTB 25 degree 4-bolt
Saddle
KHS Sport Dual Density
KHS VL-3061
Seatpost
Alloy Micro Adjust
Alloy micro-adjust, SP-232
Wheels & Tires
Hubs
Formula Alloy QR
Formula alloy
Rims
Weinmann alloy, 36-hole
Alloy, machined walls, 36-hole
Spokes
Black, 14ga. (2.0mm)
Black, 14ga. (2.0mm) straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
26 x 2.00" KHS
26 x 2.00" KHS
Wheel Size
26" wheels
26" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.