Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2007 KHS Alite 100 and 2005 KHS Alite 100.
- Data limitation
Only 2007 KHS Alite 100 has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2; rear size isn’t listed.
Gearing unavailable for this size.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2007 KHS Alite 100
2005 KHS Alite 100
Overview
Model Year
2007
2005
Brand
KHS
KHS
Model
Alite 100
Alite 100
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
Not documented
$219.00
Colors
Red
White/Blue
Sizes
15", 17", 19", 21"
—
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
7005 aluminum
Fork
Mozo M-30A, 76mm travel
Mozo M-20
Fork Material
Aluminum/steel, single crown
Aluminum/magnesium, single crown
Drivetrain
Component Group
Shimano mix
Mountain Mix
Shifters
Shimano Revo
SRAM MRX
Front Derailleur
Shimano FD-C051
Shimano Tourney TZ-31
Rear Derailleur
Shimano RD-TX30
Shimano Tourney TX-50
Crankset
Shimano FC-TX71, 28/38/48 teeth
Shimano TX-71
Bottom Bracket
VP-B33
VP-B33 cartridge
Rear Cogs
7-speed, 14 - 28 teeth
7-speed, 13 - 30 teeth
Chain
KMC Z51
KMC Z51, 1/2 x 3/32"
Pedals
VP MTB
Pvc
Brakes
Brakes
Tektro linear-pull brakes, Alloy levers
Tektro linear-pull front/Textro linear pull rear brakes, aluminum levers
Cockpit & Contact Points
Headset
1 1/8" threadless VP-71
1 1/8" threadless
Handlebar
30mm Rise
Steel
Handlebar Extensions
Not included
Not included
Stem
25 Degree 4-Bolt
Aluminum threadless
Saddle
KHS Sport Dual Density
KHS ATB
Seatpost
Alloy Micro Adjust
Aluminum micro-adjust
Wheels & Tires
Hubs
Formula Alloy QR
Formula aluminum
Rims
Weinmann alloy, 36-hole
Aluminum
Spokes
Black, 14ga. (2.0mm)
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
26 x 2.00" KHS
26 x 1.95" all-terrain
Wheel Size
26" wheels
26" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.