- Frame
- Hi-tensile steel
- Groupset
- Cruiser Mix
Cruiser · Non-electric
2007 Sun Bicycles Retro Cruiser Steel
- Not published
- Original MSRP
- Not documented
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
- Frame
- Hi-tensile steel
- Groupset
- Recumbent Mix
Cruiser · Non-electric
2006 Sun Bicycles Retro Cruiser Steel
- Not published
- Original MSRP
- Not documented
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2007 Sun Bicycles Retro Cruiser Steel and 2006 Sun Bicycles Retro Cruiser Steel.
- Data limitation
Only 2007 Sun Bicycles Retro Cruiser Steel has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.32:1
Estimated speed at 90 RPMGear
Uses front tire 26×2.125; rear size isn’t listed.
Gearing unavailable for this size.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2007 Sun Bicycles Retro Cruiser Steel
2006 Sun Bicycles Retro Cruiser Steel
Overview
Model Year
2007
2006
Brand
Sun Bicycles
Sun Bicycles
Model
Retro Cruiser Steel
Retro Cruiser Steel
Bicycle Type
Cruiser
Cruiser
Colors
Black, Blue, Red, Silver, Lt. Blue
Black, Blue, Red, Silver, Lt. Blue
Sizes
14", 18", womens 13", womens 15", womens 17"
14", 18", womens 13", womens 15", womens 17"
Weight
35 lb
35 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Sun
Sun
Fork Material
High-tensile steel, unicrown crown
High-tensile steel, unicrown crown
Drivetrain
Component Group
Cruiser Mix
Recumbent Mix
Shifters
—
Shimano Revo
Front Derailleur
—
Shimano Tourney TY-32, clamp-on
Rear Derailleur
—
Shimano RD-TX50
Crankset
Steel one-piece, 44 teeth
Steel one-piece, 44 teeth
Bottom Bracket
One piece, 117.5mm spindle
One piece, 117.5mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
1-speed, 19 teeth
1-speed, 19 teeth
Chain
KMC, 1/2 x 1/8"
KMC, 1/2 x 1/8"
Pedals
Platform, resin
Platform, resin
Brakes
Brakes
Coaster brake rear
Aluminum linear-pull front/coaster brake rear brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
1" threaded steel
1" threaded steel
Handlebar
Steel, cruiser
Steel, cruiser
Stem
Aluminum
Aluminum
Saddle
Cruiser
Cruiser
Seatpost
Steel, 25.4mm diameter
Steel, 25.4mm diameter
Wheels & Tires
Hubs
Front: steel, nutted, Rear: Shimano coaster
Front: steel, nutted, Rear: Shimano coaster
Rims
Aluminum single wall, 36-hole
Aluminum single wall, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.125" Kenda Komfort
26 x 2.125" Kenda Komfort
Wheel Size
26" wheels
26" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.