Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2005 Fuji Hokkaido.
- Data limitation
Only 2004 Fuji Hokkaido has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest0.71:1Highest3.38:1Total range479%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×40; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2005 Fuji Hokkaido
2004 Fuji Hokkaido
Overview
Model Year
2005
2004
Brand
Fuji
Fuji
Model
Hokkaido
Hokkaido
Bicycle Type
Comfort/commuter
Comfort/commuter
Colors
Quick Silver/Navy Blue
Gray/Silver
Sizes
20", 22"
20", 22", womens 18", womens 20"
Weight
36.3 lb
38.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Altair 1 Aluminum
Elios 1 chome-moly
Fork
SR Suntour CR880, 30mm travel
Fuji suspension, 30mm travel
Fork Material
Aluminum, single crown
Single
Drivetrain
Component Group
Commuter Mix
Mountain Mix
Shifters
SRAM Spectro twist shifter
Shimano ST-C050
Front Derailleur
—
Shimano C050, top-pull/clamp-on 31.8mm
Rear Derailleur
—
Shimano C050
Crankset
SR Suntour, 38 teeth
Suntour XCC-100, 24/34/44 teeth
Bottom Bracket
Sealed cartridge
Sealed, 120mm spindle
BB Shell Width
—
68mm English
Rear Cogs
7-speed internal, 16 teeth
7-speed, 13 - 34 teeth
Chain
KMC Z408, 1/2 x 3/32"
Shimano CN-UG50, 1/2 x 3/32"
Pedals
Marwi Alloy/Kraton trekking
Wellgo
Brakes
Brakes
ProMax forged linear-pull brakes, ProMax linear-pull levers
ProMax forged linear-pull brakes, Shimano ST-C050 levers
Cockpit & Contact Points
Headset
1 1/8" threadless aluminum
1 1/8" threadless sealed mechanism
Handlebar
Aluminum riser
Aluminum, rise
Handlebar Extensions
Not included
Not included
Stem
Aluminum
Aluminum, adjustable
Saddle
Fuji Trekking
Fuji Trekking
Seatpost
Aluminum suspension
Aluminum micro-adjust, 27.2mm diameter
Wheels & Tires
Hubs
Front: Shimano HB-NX30 Dynamo, Rear: SRAM Spectro
Fuji Oversize
Rims
Schurmann Euroline aluminum, 36-hole
Alex ID-19, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 37c Continental Contact
700 x 40c Cheng Shin
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
71°
Seat-tube angle
—
74°
Chainstay / rear center
—
455 mm
Wheelbase
—
1085 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.