Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.00:1
Estimated speed at 90 RPMGear
Rear tire: 20×1.75.
Ratio2.00:1
Estimated speed at 90 RPMGear
Uses front tire 20×1.75; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2002 Raleigh MXR
2003 Raleigh MXR
Overview
Model Year
2002
2003
Brand
Raleigh
Raleigh
Model
MXR
MXR
Bicycle Type
Juvenile
Juvenile
Original MSRP
$139.99
$109.99
Colors
Black, Metallic Silver
Chrome, Tuff Red
Sizes
20" Wheel
20" Wheel
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Raleigh
Raleigh
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Juvenile Mix
Juvenile Mix
Crankset
1-piece 5 1/2", 36 teeth
1-piece 5 1/2", 36 teeth
Bottom Bracket
One piece, one-piece spindle
One piece, one-piece spindle
BB Shell Width
American
American
Rear Cogs
1-speed, 18 teeth
1-speed, 18 teeth
Chain
KMC Z-410, 1/2 x 1/8"
KMC Z410, 1/2 x 1/8"
Pedals
Resin
Resin
Brakes
Brakes
ProMax VS-77 Linear rear brakes, ProMax LV-50AS rear levers
Coaster/aluminum linear-pull rear brakes, aluminum rear levers
Cockpit & Contact Points
Headset
1" steel
1" steel
Handlebar
Steel BMX
Steel BMX
Handlebar Extensions
Not included
Not included
Stem
Alloy 4 bolt
Alloy 4 bolt
Saddle
Velo Juvenile
Velo Juvenile
Seatpost
Steel, 25.4mm diameter
Steel, 25.6mm diameter
Wheels & Tires
Hubs
Front: steel, nutted, Rear: steel, coaster brake
Front: steel, nutted, Rear: steel, coaster brake
Rims
Aluminum, 36-hole
Aluminum, 36-hole
Spokes
UCP, 14ga. (2.0mm) straight gauge
UCP, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 x 2.125" Kenda K-50
20 x 1.75" knobby
Rear Tire
20 x 1.75" Kenda K-50
—
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
69°
69°
Chainstay / rear center
374.6 mm
374.6 mm
Wheelbase
894.1 mm
894.1 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.