Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2001 Peugeot Attitude.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2001 Peugeot Attitude48/38/28T · 14–28T · 7-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

1996 Peugeot AttitudeSize Legacy reference · 48/38/28T · 14–28T · 6-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2001 Peugeot Attitude
1996 Peugeot Attitude
Overview
Model Year
2001
1996
Brand
Peugeot
Peugeot
Model
Attitude
Attitude
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$250.00
$239.00
Colors
Green, Grey, Red
Misty blue/green, Titanium/Blue
Sizes
40, 45, 45cm, 50, 55, 60cm
40 cm, 45 cm, 50 cm, 55 cm, womens 45 cm
Weight
30.5 lb
—
Frameset
Frame Construction
Silver-brazed
Direct brazing steel
Frame Material
Chromoly
Chromoly main triangle/hi-tensile steel rear stays
Fork
Akisu
Peugeot
Fork Material
Hi-tensile steel, oversize, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Mountain Mix
Shimano Tourney TY-30
Shifters
Shimano Acera EZ Fire Plus
Grip Shift Quickshift
Front Derailleur
Shimano Tourney TY-22, top-pull/clamp-on 35.0mm
Shimano Tourney TY-30, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano Tourney TY-22
Shimano Tourney TY-30
Crankset
Aluminum 3-piece, 28/38/48 teeth
Sugino Grande 50, 28/38/48 teeth
Bottom Bracket
Steel, 102mm spindle
Steel
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed freewheel, 14 - 28 teeth
6-speed, 14 - 28 teeth
Chain
Shimano CN-UG50, 1/2 x 3/32"
KMC HP-20, 1/2 x 3/32"
Pedals
Aluminum cage w/clips & straps
Victor VP-892
Brakes
Brakes
Aluminum linear-pull front/aluminum V-brake rear brakes, Shimano Acera levers
Alloy cantilever brakes, Vanguard resin/alloy levers
Cockpit & Contact Points
Headset
1 1/8" threadless Aheadset
1" YST steel
Handlebar
Steel, rise
Steel
Handlebar Extensions
Not included
Not included
Stem
Aluminum Ahead type
Steel
Saddle
—
Selle Royal Soft Fit
Seatpost
25.8mm diameter
Steel, 26.8 mm diameter
Wheels & Tires
Hubs
Front: aluminum, Q/R, Rear: steel, Q/R
—
Rims
Rigida Aluminum, 36-hole
Rigida AS-26, 36-hole
Spokes
Sapim reinforced nylon, 1.8mm straight gauge
Sapim steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95"
26 x 1.95" Kenda K-831
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
71°
Seat-tube angle
—
73°
Chainstay / rear center
—
460 mm
Wheelbase
—
1081 mm
Fork offset / rake
—
45 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top