Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2000 Fuji Sandblaster.

  2. Gearing

    2000 Fuji Sandblaster has a 30% lower climbing ratio than 2001 Fuji Sandblaster.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2001 Fuji SandblasterSize Legacy reference · 40T · 13–28T · 7-speed
Lowest1.43:1Highest3.08:1Total range215%
Estimated speed at 90 RPMLowest gear7.6 mphHighest gear16.5 mph

Uses front tire 20×2; rear size isn’t listed.

2000 Fuji Sandblaster48/38/28T · 13–28T · 7-speed
Lowest1.00:1Highest3.69:1Total range369%
Estimated speed at 90 RPMLowest gear5.4 mphHighest gear19.8 mph

Uses front tire 20×2; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2001 Fuji Sandblaster
2000 Fuji Sandblaster
Overview
Model Year
2001
2000
Brand
Fuji
Fuji
Model
Sandblaster
Sandblaster
Bicycle Type
Juvenile
Juvenile mountain bike, suspension
Original MSRP
$180.00
$169.99
Colors
Black, Purple, Red
Inca Blue, Plum
Sizes
11.5"
—
Weight
26.4 lb
—
Frameset
Frame Construction
TIG-welded
—
Frame Material
Hi-tensile steel, oversize
Hi-tensile steel
Fork
—
Chili 250
Fork Material
Chromoly/hi-tensile steel, unicrown crown
Triple-clamp
Drivetrain
Component Group
Juvenile Mix
Mountain Mix
Shifters
Shimano Tourney RevoShift
Shimano Revo
Rear Derailleur
Shimano Tourney TY-22
Shimano Tourney TY-40
Crankset
ProWheel resin/steel, 40 teeth
ProWheel resin/steel, 28/38/48 teeth
Bottom Bracket
VP, 116mm spindle
Vp
BB Shell Width
68mm English
—
Rear Cogs
7-speed, 13 - 28 teeth
7-speed, 13 - 28 teeth
Chain
KMC UG-50, 1/2 x 3/32"
Shimano CN-UG50, 1/2 x 3/32"
Pedals
Wellgo resin
Vp
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
ProMax linear-pull brakes, ProMax linear-pull levers
Cockpit & Contact Points
Headset
1 1/8"
Vp
Handlebar
—
Fuji
Handlebar Extensions
Not included
Not included
Stem
—
Fuji
Saddle
Fuji DuraFlex Junior
Fuji DuraFlex Junior
Seatpost
Aluminum, 25.6mm diameter
Steel
Wheels & Tires
Hubs
Steel, nutted
Front: steel, Q/R, Rear: steel, nutted
Rims
Weinmann CN-520, 36-hole
Weinmann CN-520, 36-hole
Spokes
UCP, 14g
UCP, 2.0mm
Front Tire
20 x 2.00" Innova ATB
20 x 2.00" Kenda Semi Knob
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
71°
—
Seat-tube angle
72°
—
Chainstay / rear center
385 mm
—
Wheelbase
844 mm
—
Fork offset / rake
45 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top