Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1999 Haro Master has a 1.0° slacker head-tube angle than 2000 Haro Master in the archived geometry. Frame size is not identified for 2000 Haro Master and 1999 Haro Master.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1999 Haro Master has a 24% lower climbing ratio than 2000 Haro Master.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2000 Haro MasterSize Legacy reference · 37T · 14T · 1-speed
Ratio2.64:1
Estimated speed at 90 RPMGear14.3 mph

Uses front tire 20×2.1; rear size isn’t listed.

1999 Haro MasterSize Legacy reference · 32T · 16T · 1-speed
Ratio2.00:1
Estimated speed at 90 RPMGear10.8 mph

Uses front tire 20×2.1; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2000 Haro Master
1999 Haro Master
Overview
Model Year
2000
1999
Brand
Haro
Haro
Model
Master
Master
Bicycle Type
Freestyle/jumping
Freestyle/jumping
Original MSRP
$749.00
$670.00
Colors
Loogie Green, Pearl White
Chrome-Plated, Cromolive
Sizes
One size only
Pro
Weight
36.8 lb
36.4 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
4130 chromoly
4130 chromoly
Fork
Haro Ground Zero
Haro Ground Zero
Fork Material
4130 chromoly, unicrown crown
4130 chromoly, unicrown crown
Drivetrain
Crankset
Fusion 3-peice chromoly 160mm, 37 teeth
Fusion 3-piece chromoly, 32 teeth
Bottom Bracket
Fusion sealed
Fusion sealed, 145mm spindle
BB Shell Width
—
68mm English
Rear Cogs
1-speed, 14 teeth
1-speed, 16 teeth
Chain
KMC Z510, 1/2 x 1/8"
KMC 230HX, 1/2 x 3/32"
Pedals
Haro Big Block
Haro Big Block
Brakes
Brakes
DiaTech 996 U-Brake brakes, Dia-Compe Tech 99 levers
Dia-Compe 990 brakes, Dia-Compe Tech 99 levers
Cockpit & Contact Points
Headset
1 1/8" threadless Aheadset SB-1 w/SST Oryg detangler
1 1/8" threadless Aheadset w/SST Oryg detangler
Handlebar
Haro Mirra Bar
Haro Kneesaver II
Stem
Haro forged alloy
Haro
Saddle
Haro padded
Haro Stubby
Seatpost
Haro Twin Torque Cromoly micro-adjust, 25.4mm diameter
Fusion, 25.4mm diameter
Wheels & Tires
Hubs
Front: Haro Meganuke, Rear: Haro Freecoaster
Haro Megahub
Rims
Haro Heffer 3, 48-hole
Haro Heffer 3, 48-hole
Spokes
Stainless steel, 2.2 mm straight gauge
Stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 x 2.10" Haro Multisurface III
20 x 2.10" Haro Multisurface III
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
75°
74°
Seat-tube angle
69°
69°
Chainstay / rear center
344.9 mm
374.6 mm
Wheelbase
832.1 mm
861.1 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top