Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2000 Burley Duet.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.00:1Highest4.82:1Total range482%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×25; rear size isn’t listed.
Lowest1.00:1Highest4.82:1Total range482%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×25; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 Burley Duet
1998 Burley Duet
Overview
Model Year
2000
1998
Brand
Burley
Burley
Model
Duet
Duet
Bicycle Type
Tandem (road)
Tandem (road)
Original MSRP
$2,250.00
$2,200.00
Colors
Cherry Pop Metallic Powdercoat
Hot rod red
Sizes
Captain 20.5"/stoker 18", captain 22"/stoker 19.5", captain 23.5"/stoker 21"
Captain 20.5"/stoker 18", captain 22"/stoker 19.5", captain 23.5"/stoker 21"
Weight
40.5 lb
40.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
True Temper Tandem chromoly, Burley Exclusive
True Temper Tandem chromoly, Burley Exclusive
Fork
Burley
Burley
Fork Material
4130 chromoly, unicrown crown
True Temper Tandem chromoly, Burley-Exclusive, unicrown crown
Drivetrain
Component Group
Tandem Mix
Tandem Mix
Shifters
Shimano 105 STI Dual Control
Shimano 105SC STI Dual Control
Front Derailleur
Shimano 105, bottom-pull/clamp-on 28.6mm
Shimano 105SC, bottom-pull/clamp-on 28.6mm
Rear Derailleur
Shimano Deore XT GS
Shimano Deore XT SGS
Crankset
Shimano 105, 30/42/53 teeth
Shimano Tandem, 30/42/53 teeth
Bottom Bracket
Burley Tandem precision sealed, 121mm spindle
Burley Tandem precision sealed, 122mm spindle
BB Shell Width
82mm Special Tandem
82mm Special Tandem
Rear Cogs
9-speed, 11 - 30 teeth
8-speed, 11 - 30 teeth
Chain
Shimano CN-HG72, 1/2 x 3/32"
Shimano CN-HG50, 1/2 x 3/32"
Pedals
Ritchey Logic
Wellgo WPD-700 clipless
Brakes
Brakes
Tektro 823A linear-pull brakes, Shimano 105 STI levers
Shimano Deore LX M-System brakes, Shimano 105SC levers
Cockpit & Contact Points
Headset
1 1/8" threadless Ritchey Logic
1 1/8" Tange-Seiki Avenger
Handlebar
Ritchey Road Logic
Burley Racing, aluminum
Stem
Ritchey CompLite
Burley chromoly
Saddle
Selle Italia Future Race
Vetta SL
Seatpost
Ritchey Expert, 26.6mm diameter
Aluminum micro-adjust, 26.6mm diameter
Wheels & Tires
Hubs
Shimano Deore XT
Shimano Tandem HF-07
Rims
Front: Bontrager Fairlane Symmetric, Rear: Bontrager Fairlane Asymmetric, 48-hole
Matrix Vapor, 48-hole
Spokes
Wheelsmith stainless steel, 1.8mm straight gauge
Wheelsmith stainless steel, 2.0mm straight gauge
Spoke Nipples
Alloy nipples
Brass nipples
Front Tire
700 x 25c Ritchey Tom Slick
700 x 25c Ritchey Tom Slick
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
73°
Seat-tube angle
—
73°
Chainstay / rear center
—
438 mm
Wheelbase
—
1730 mm
Fork offset / rake
—
55 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.