Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Selected-size geometry
Geometry overlay
Frames share one scale and a bottom-bracket alignment. Size labels differ by brand; schematic drawing aids are identified below.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.00:1Highest4.55:1Total range455%
Estimated speed at 90 RPMLowest gearHighest gear
Rear tire: 700C×32.
Lowest1.00:1Highest4.55:1Total range455%
Estimated speed at 90 RPMLowest gearHighest gear
Rear tire: 700C×32.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2019 Cannondale Synapse NEO 2
2020 Cannondale Synapse NEO 2
Overview
Model Year
2019
2020
Brand
Cannondale
Cannondale
Model
Synapse NEO 2
Synapse NEO 2
Bicycle Type
Electric-assist
Electric-assist
Colors
Jet Black w/ Sage Gray and Volt - Gloss (SGG)
Midnight (MDN)
Sizes
S, M, L, XL
S, M, L, XL
Weight
—
—
Frameset
Frame Construction
ALL-NEW Synapse NEO, SmartForm C1 Alloy, SAVE, Ai, flat mount brake, 142x12 thru-axle
SmartForm C1 Alloy, removable downtube battery, SAVE, Ai, internal cable routing, flat mount brake, 142x12 thru-axle, Si kickstand mount, rack/fender mounts
Frame Material
Aluminum
Aluminum
Fork
ALL-NEW Synapse NEO Disc, BallisTec Carbon, 1-1/8” to 1.5” tapered steerer, 55mm offset, flat mount, 12x100 thru axle
BallisTec Carbon, 1-1/8” to 1.5” tapered steerer, 55mm offset, flat mount brake, 12x100 thru axle, fender mounts, hidden cable routing
Fork Material
Carbon
Carbon
Drivetrain
Shifters
Shimano 105 7020 hydro disc, 2x11
Shimano Tiagra, 2x10
Front Derailleur
Shimano 105, braze-on
Shimano 105, braze-on
Rear Derailleur
Shimano Ultegra
Shimano Tiagra GS
Crankset
Bosch Gen3 w/ custom Ai offset spider & FSA rings, 50/34
Bosch Gen3 w/ custom Ai offset & FSA rings, 50/34
Rear Cogs
Shimano Ultegra, 11-34, 11-speed
Shimano HG500, 11-34, 10-speed
Chain
Shimano E8000, 11-speed
Shimano HG54, 10-speed
Pedals
Not Included
Not Included
Brakes
Brakes
Shimano 105 7070 hydro disc, 160/160mm RT70 rotors
Shimano Tiagra hydro disc, 160/160mm RT64 rotors
Cockpit & Contact Points
Headset
Integrated, 1-1/8 to 1.5”, sealed angular contact bearings
Integrated, 1-1/8 to 1.5”, sealed angular contact bearings
Handlebar
Cannondale C3, 6061 Alloy, Compact
Cannondale 3, 6061 alloy, Compact
Stem
Cannondale C3, 3D Forged 6061 Alloy, 1-1/8”, 31.8, 7°
Cannondale 3, 6061 alloy, 7-degree
Saddle
Fabric Scoop Shallow Race, ti rails
Fabric Scoop Shallow Sport, steel rails
Seatpost
Cannondale SAVE Carbon, 25.4x350mm
Cannondale 3, 6061 Alloy, 25.4, 350mm (S-M), 400mm (L-XL)
Wheels & Tires
Hubs
Formula CL-712 front, RXC-142S rear
(F) Formula CL-712 / (R) RXC-142S
Rims
WTB KOM Light i23 TCS 2.0, 28h, tubeless ready
RD 2.0, 28h
Spokes
DT Swiss Champion
DT Swiss Champion
Front Tire
WTB Exposure TCS, 700 x 32c, Distance + compound, tubeless ready
WTB Exposure Comp, 700 x 32c, Distance compound
Rear Tire
WTB Exposure TCS, 700 x 32c, Distance + compound, tubeless ready
WTB Exposure Comp, 700 x 32c, Distance compound
Wheel Size
700c
700c
E-bike System
Motor
Bosch Active Line Plus 250W
Bosch Active Line Plus 250W
Battery
Bosch PowerTube 500Wh
Bosch PowerTube 500Wh
Display/Remote
Bosch Purion
Bosch Purion
Charger
Bosch 4A
Bosch 4a
Geometry · choose a size for each bicycle
Geometry size
Reach
387 mm
387 mm
Stack
575 mm
577 mm
Effective top tube
552 mm
552 mm
Head-tube angle
71°
71°
Seat-tube angle
74°
74°
Seat tube
490 mm
490 mm
Head tube
157 mm
157 mm
Chainstay / rear center
438 mm
438 mm
Wheelbase
1053 mm
1053 mm
Bottom-bracket drop
67 mm
67 mm
Bottom-bracket height
—
282 mm
Standover height
770 mm
770 mm
Fork offset / rake
—
55 mm
Front center
—
624 mm
Trail
—
62 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.