Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Identity & price
These bicycles are categorized differently: 2004 KHS Brentwood is Hybrid; 2005 KHS Brentwood is City & Commuter.
- Data limitation
No geometry is recorded for 2005 KHS Brentwood.
- Data limitation
Only 2004 KHS Brentwood has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×38; rear size isn’t listed.
Gearing unavailable for this size.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2004 KHS Brentwood
2005 KHS Brentwood
Overview
Model Year
2004
2005
Brand
KHS
KHS
Model
Brentwood
Brentwood
Bicycle Type
Hybrid
Comfort/commuter
Original MSRP
$219.00
$209.00
Colors
Blue, Silver
Blue, Silver/Burgundy
Sizes
Womens 15", 15", 17", 19", 21", womens 17"
—
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel
—
Fork
Khs
Khs
Fork Material
Hi-tensile steel, unicrown crown
High-tensile steel, unicrown crown
Drivetrain
Component Group
Hybrid Mix
Comfort Mix
Shifters
SEC Twistshift
SRAM MRX
Front Derailleur
Shimano Tourney TZ-31
Shimano Tourney TZ-31
Rear Derailleur
Shimano TX-50
Shimano Tourney TX-50
Crankset
Shimano Tourney TY-33, 28/38/48 teeth
Shimano TY-33
Bottom Bracket
Semi-cartridge
VP-B33 cartridge
Rear Cogs
7-speed, 14 - 28 teeth
7-speed, 13 - 30 teeth
Chain
KMC Z51, 1/2 x 3/32"
KMC Z51, 1/2 x 3/32"
Pedals
Pvc
Pvc
Brakes
Brakes
ProMax linear-pull brakes, ProMax linear-pull levers
ProMax linear-pull brakes, Promax aliminum front/Promax aluminum rear levers
Cockpit & Contact Points
Headset
1 1/8" steel
—
Handlebar
Steel, 4" rise
Steel
Handlebar Extensions
Not included
Not included
Stem
Steel
Aluminum, suspension
Saddle
KHS Padded
KHS Padded
Seatpost
Aluminum, suspension
Aluminum suspension
Wheels & Tires
Hubs
Front: aluminum, Q/R, Rear: aluminum, nutted
Front: aluminum, Q/R, Rear: aluminum, nutted
Rims
Aluminum, 36-hole
Aluminum, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 38c KHS City Slick
700 x 38c KHS City Slick
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
71°
—
Seat-tube angle
73°
—
Chainstay / rear center
431.8 mm
—
Wheelbase
1033.8 mm
—
Fork offset / rake
44.4 mm
—
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.