- Frame
- 7005 aluminum
- Groupset
- Tandem Mix
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.88:1Highest4.73:1Total range536%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×28; rear size isn’t listed.
Lowest0.88:1Highest4.73:1Total range536%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×28; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2004 KHS Tandemania Roma
2003 KHS Tandemania Roma
Overview
Model Year
2004
2003
Brand
KHS
KHS
Model
Tandemania Roma
Tandemania Roma
Bicycle Type
Tandem (road)
Tandem (road)
Original MSRP
Not documented
$2,399.00
Colors
Black/Cabernet
Black/Cabernet
Sizes
Captain 20"/stoker 16", captain 23"/stoker 21"
Captain 20"/stoker 16", captain 23"/stoker 21"
Weight
38.5 lb
38.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
7005 aluminum
Fork
Khs
Khs
Fork Material
Chromoly, oversize, unicrown crown
Chromoly, oversize, unicrown crown
Drivetrain
Component Group
Tandem Mix
Tandem Mix
Shifters
Shimano Ultegra STI Dual Control
Shimano Ultegra STI Dual Control
Front Derailleur
Shimano 105
Shimano 105
Rear Derailleur
Shimano Deore XT SGS
Shimano Deore XT SGS
Crankset
Sugino RD-5000T, 30/42/52 teeth
Sugino RD-5000T, 30/42/52 teeth
Bottom Bracket
Tien Hsin BB-7418
Tien Hsin BB-7418
Rear Cogs
9-speed, 11 - 34 teeth
9-speed, 11 - 34 teeth
Chain
KMC Z9000, 1/2 x 3/32"
KMC Z9000, 1/2 x 3/32"
Pedals
Vp
Vp
Brakes
Brakes
Shimano Deore LX V-brake brakes, Shimano Ultegra STI Dual Control levers
Shimano Deore LX V-brake brakes, Shimano Ultegra STI Dual Control levers
Cockpit & Contact Points
Headset
1 1/8" threadless Tioga DX2
1 1/8" threadless Tioga DX2
Handlebar
Aluminum drop bar
Aluminum drop bar
Handlebar Extensions
Not included
Not included
Stem
Aluminum threadless
Aluminum threadless
Saddle
Selle Italia Flite Trans Am
Selle Italia Flite Trans Am
Seatpost
C-Kalloy SP-267, s-Post Moderne Solace-SL
C-Kalloy SP-267, s-Post Moderne Solace-SL
Wheels & Tires
Hubs
Front: aluminum, Q/R, Rear: Shimano Deore XT 145mm
Front: aluminum, Q/R, Rear: Shimano Deore XT 145mm
Rims
Sun Rims CR16 T2, 40-hole
Sun Rims CR16 T2, 40-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 28c Panaracer Pasela
700 x 28c Panaracer Pasela
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
74°
74°
Seat-tube angle
73°
73°
Chainstay / rear center
439.4 mm
439.4 mm
Fork offset / rake
44.4 mm
44.4 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.