Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1999 Peugeot Attitude and 2001 Peugeot Attitude.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1999 Peugeot Attitude48/38/28T · 14–28T · 7-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

2001 Peugeot Attitude48/38/28T · 14–28T · 7-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1999 Peugeot Attitude
2001 Peugeot Attitude
Overview
Model Year
1999
2001
Brand
Peugeot
Peugeot
Model
Attitude
Attitude
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$260.00
$250.00
Colors
Gray, Red
Green, Grey, Red
Sizes
40cm, 45cm, 50cm, 55cm, womens 45cm
40, 45, 45cm, 50, 55, 60cm
Weight
34.1 lb
30.5 lb
Frameset
Frame Construction
TIG-welded
Silver-brazed
Frame Material
Chromoly main triangle/hi-tensile steel rear stays
Chromoly
Fork
Chien Sing
Akisu
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, oversize, unicrown crown
Drivetrain
Component Group
Shimano Tourney TY-22
Mountain Mix
Shifters
Shimano Altus EZ Fire Plus
Shimano Acera EZ Fire Plus
Front Derailleur
Shimano Tourney TY-22 top-swing, top-pull
Shimano Tourney TY-22, top-pull/clamp-on 35.0mm
Rear Derailleur
Shimano Tourney TY-22
Shimano Tourney TY-22
Crankset
CTL-336 SQSI, 28/38/48 teeth
Aluminum 3-piece, 28/38/48 teeth
Bottom Bracket
Yst
Steel, 102mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 14 - 28 teeth
7-speed freewheel, 14 - 28 teeth
Chain
Shimano CN-UG50, 1/2 x 3/32"
Shimano CN-UG50, 1/2 x 3/32"
Pedals
Victor VP-872N
Aluminum cage w/clips & straps
Brakes
Brakes
Chang Star VB-911 D brakes, Shimano EF-28 levers
Aluminum linear-pull front/aluminum V-brake rear brakes, Shimano Acera levers
Cockpit & Contact Points
Headset
1" YST steel
1 1/8" threadless Aheadset
Handlebar
Steel
Steel, rise
Handlebar Extensions
—
Not included
Stem
LC-LCH 739N
Aluminum Ahead type
Saddle
Velo VL-194-3
—
Seatpost
Lee Chi PO8
25.8mm diameter
Wheels & Tires
Hubs
Front: Formula FM 11, Rear: Joy Tech 434
Front: aluminum, Q/R, Rear: steel, Q/R
Rims
Rigida AS-26, 36-hole
Rigida Aluminum, 36-hole
Spokes
Sapim steel, 2.0mm straight gauge
Sapim reinforced nylon, 1.8mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95" Kenda K-831
26 x 1.95"
Wheel Size
26" wheels
26" wheels

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.

Scroll to Top