Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1999 Giant Iguana SE has a 1.3° slacker head-tube angle than 1995 Giant Iguana SE in the archived geometry. Frame size is not identified for 1999 Giant Iguana SE and 1995 Giant Iguana SE.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1999 Giant Iguana SE has a 14% lower climbing ratio than 1995 Giant Iguana SE.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1999 Giant Iguana SESize Legacy reference · 42/32/22T · 11–30T · 8-speed
Lowest0.73:1Highest3.82:1Total range521%
Estimated speed at 90 RPMLowest gear5.2 mphHighest gear26.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

1995 Giant Iguana SESize Legacy reference · 42/34/24T · 11–28T · 7-speed
Lowest0.86:1Highest3.82:1Total range445%
Estimated speed at 90 RPMLowest gear6.0 mphHighest gear26.5 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1999 Giant Iguana SE
1995 Giant Iguana SE
Overview
Model Year
1999
1995
Brand
Giant
Giant
Model
Iguana SE
Iguana SE
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$525.00
$533.00
Colors
Blue, Mango/Black Split, White/Silver Split
Green
Sizes
14.5", 17.5", 19.5", 21.5", 23.5", womens 14.5", womens 17.5", womens 19.5"
16", 18", 20"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
Custom 6061 Aluminum
Chromoly, butted
Fork
Rock Shox Jett T2, 2.5" travel
RST EGS 381
Fork Material
Aluminum/magnesium, triple-clamp crown
Aluminum/chromoly, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Shimano Alivio
Shifters
Shimano Alivio RapidFire SL
Grip Shift SRT-400
Front Derailleur
Shimano Alivio
Shimano Alivio, top-pull
Rear Derailleur
Shimano STX-RC
Shimano STX
Crankset
Shimano Alivio, 22/32/42 teeth
Shimano Alivio HyperDrive-C, 24/34/42 teeth
Bottom Bracket
Shimano cartridge
—
Rear Cogs
8-speed, 11 - 30 teeth
7-speed, 11 - 28 teeth
Chain
KMC Z-72, 1/2 x 3/32"
Shimano CN-IG50, 1/2 x 3/32"
Pedals
MTB steel w/nylon toe clips & straps
Nylon MTB w/clips and straps
Brakes
Brakes
Dia-Compe 733 Direct Pull w/linear spring brakes, Dia-Compe DP-7N Alloy Direct Pull levers
Shimano Alivio brakes, Chang Star 274A levers
Cockpit & Contact Points
Headset
1 1/8" threadless Tange TG Aheadset
1 1/8" OV850
Handlebar
Alloy MTB
Steel
Handlebar Extensions
—
Giant chromoly
Stem
Alloy Ahead 25D rise
Steel
Saddle
WTB SST
Selle San Marco Slim
Seatpost
Aluminum micro-adjust, 300mm, 30.8mm diameter
Kalloy SP-242, 30.2 mm diameter
Wheels & Tires
Hubs
Shimano Alivio
Alloy Q/R
Rims
Alloy, double wall, 36-hole
Araya VP-20, 36-hole
Spokes
Stainless steel, 2.0mm
Stainless steel, 2.0 mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.10" WTB VelociRaptor
26 x 1.95" Kenda
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
71.3°
Seat-tube angle
74°
73°
Chainstay / rear center
431.8 mm
431.8 mm
Wheelbase
1023.6 mm
1028.7 mm
Fork offset / rake
—
38.1 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top