Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1999 Schwinn Passage.

  2. Gearing

    1997 Schwinn Passage has a 25% lower climbing ratio than 1999 Schwinn Passage.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1999 Schwinn Passage52/42/32T · 11–24T · 8-speed
Lowest1.33:1Highest4.73:1Total range355%
Estimated speed at 90 RPMLowest gear9.4 mphHighest gear33.3 mph

Uses front tire 700C×23; rear size isn’t listed.

1997 Schwinn PassageSize Legacy reference · 46/36/26T · 11–26T · 7-speed
Lowest1.00:1Highest4.18:1Total range418%
Estimated speed at 90 RPMLowest gear7.1 mphHighest gear29.6 mph

Uses front tire 700C×25; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1999 Schwinn Passage
1997 Schwinn Passage
Overview
Model Year
1999
1997
Brand
Schwinn
Schwinn
Model
Passage
Passage
Bicycle Type
Road/sport
Road/sport
Original MSRP
$699.00
$699.00
Colors
Metallic Orange
Metallic blue
Sizes
48cm, 50cm, 52cm, 54cm, 56cm, 58cm, 60cm, 62cm
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum w/replaceable derailleur hanger
Chromoly, double-butted
Fork
Schwinn
Schwinn
Fork Material
Aluminum, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Shimano RSX Triple
Shimano RSX
Shifters
Shimano RSX STI Dual Control
Shimano RSX STI Dual Control
Front Derailleur
Shimano RSX top-swing
Shimano RSX top-swing, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano RSX GS
Shimano RSX GS
Crankset
Shimano RSX, 32/42/52 teeth
Shimano RSX, 26/36/46 teeth
Bottom Bracket
—
Shimano BB-LP26, 118 mm spindle
BB Shell Width
—
68mm English
Rear Cogs
8-speed, 11 - 24 teeth
7-speed, 11 - 26 teeth
Chain
1/2 x 3/32"
Shimano CN-HG50, 1/2 x 3/32"
Pedals
Steel cage, aluminum body w/clips & straps
Aluminum cage w/clips & straps
Brakes
Brakes
Shimano RSX Dual Pivot brakes, Shimano RSX STI levers
Shimano RSX Dual Pivot brakes, Shimano RSX levers
Cockpit & Contact Points
Headset
1" Tioga SE-2
1" Tioga SE-II
Handlebar
Aluminum, drop style
Aluminum
Stem
Chromoly
Chromoly
Saddle
Schwinn Road
Schwinn Road Comfort
Seatpost
Kalloy SP-339
Hsin Lung SP-51, 27.2 mm diameter
Wheels & Tires
Hubs
Front: Formula aluminum, Q/R, Rear: Shimano AceraX
Front: Formula aluminum, Q/R, Rear: Shimano RSX
Rims
Mavic CXP 11, 32-hole
Mavic CXP 10, 32-hole
Spokes
Stainless steel, 2.0mm straight gauge
Stainless steel, 1.8mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 23c Schwinn Natural 66
700 x 25c Schwinn
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
74°
Seat-tube angle
—
73.5°
Chainstay / rear center
—
410 mm
Wheelbase
—
983 mm
Fork offset / rake
—
40 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top