Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 1999 Marin Hawk Hill.
- Data limitation
Only 2000 Marin Hawk Hill has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest0.73:1Highest4.00:1Total range545%
Speed unavailable: wheel or tire size is missing or unclear.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
1999 Marin Hawk Hill
2000 Marin Hawk Hill
Overview
Model Year
1999
2000
Brand
Marin
Marin
Model
Hawk Hill
Hawk Hill
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$442.00
$449.00
Colors
Polished
Brush Polish
Sizes
11.5", 13.5", 15.5", 17.5", 19", 20.5", womens 17"
11.5", 13", 15", 17", 18.5", 20"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Aluminum
Ovation 7000 aluminum
Fork
Sync
In-Sync 328
Fork Material
Triple-clamp
Aluminum, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
SRAM ESP 5.0
SRAM 5.0
Front Derailleur
Shimano Alivio top-swing
Shimano Acera
Rear Derailleur
SRAM ESP 5.0
SRAM ESP 5.0
Crankset
Cyclone
Cyclone alloy, 22/32/44 teeth
Bottom Bracket
—
Sealed cartridge
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 30 teeth
Chain
1/2 x 3/32"
Shimano CN-IG31, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
Aluminum linear-pull brakes, alloy levers
Cockpit & Contact Points
Headset
1 1/8" threadless Ritchey Logic
Tange-Seiki STE
Handlebar
Aluminum, rise
Alloy riser
Handlebar Extensions
Not included
Not included
Stem
Marin alloy
Alloy
Saddle
Marin MTB
WTB SSTX2
Seatpost
Aluminum micro-adjust
Aluminum micro-adjust, 27.0mm diameter
Wheels & Tires
Hubs
Aluminum, Q/R
Aluminum, Q/R
Rims
Alloy, double wall, 32-hole
Alloy, 32-hole
Spokes
Stainless steel, 1.8mm straight gauge
Stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
—
Front Tire
26 x 2.00" IRC Mythos XC
IRC Mythos XC
Wheel Size
26" wheels
—
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
70°
Seat-tube angle
—
73°
Chainstay / rear center
—
425.4 mm
Wheelbase
—
1057.3 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.