Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. No key difference could be established from the available data. Check the full table for the details.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1999 Haro Vector V0Size Legacy reference · 48/38/28T · 14–34T · 7-speed
Lowest0.82:1Highest3.43:1Total range416%
Estimated speed at 90 RPMLowest gear5.7 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

2000 Haro Vector V0Size Legacy reference · 48/38/28T · 14–34T · 7-speed
Lowest0.82:1Highest3.43:1Total range416%
Estimated speed at 90 RPMLowest gear5.7 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1999 Haro Vector V0
2000 Haro Vector V0
Overview
Model Year
1999
2000
Brand
Haro
Haro
Model
Vector V0
Vector V0
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$220.00
$230.00
Colors
Cayman, Deep Red
Anodized Blue, Mustard, Sea Spray
Sizes
13.5", 15.5", 17.5", 19.5", 21.5"
13.5", 15.5", 17.5", 19.5", 21.5"
Weight
30.3 lb
32 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
Chromoly seat tube/hi-tensile steel
Fork
Haro R800
Haro
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Revo
Shimano Revo
Front Derailleur
Shimano Tourney TY-32, bottom-pull/clamp-on 28.6mm
Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm
Rear Derailleur
Shimano MR-40
Shimano MR-40
Crankset
SR XR11, 28/38/48 teeth
SR XR180, 28/38/48 teeth
Bottom Bracket
Tien Hsin, 118mm spindle
Tien Hsin
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 14 - 34 teeth
7-speed, 14 - 34 teeth
Chain
KMC HG-50, 1/2 x 3/32"
KMC Z-51, 1/2 x 3/32"
Pedals
Resin
Haro Resin
Brakes
Brakes
Chang Star linear-pull brakes, Chang Star aluminum levers
ProMax linear-pull brakes, ProMax linear-pull levers
Cockpit & Contact Points
Headset
1" YST steel
1" YST
Handlebar
Steel, rise
High-rise steel
Handlebar Extensions
Not included
Not included
Stem
Hsin Lung steel
Hsin Lung steel
Saddle
Haro Selle Comfort
Haro Selle Comfort
Seatpost
Haro micro-adjust, 26.2mm diameter
Steel, 29.4mm diameter
Wheels & Tires
Hubs
Joy Tech aluminum, nutted
Joy Tech aluminum, Q/R
Rims
Haro RC3, 36-hole
Weinmann 519, 36-hole
Spokes
Steel, 2.0mm straight gauge
UCP, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95" Kenda Komfort
26 x 1.95" Haro Kombi
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71.5°
71.5°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
424.2 mm
Wheelbase
1051.6 mm
1056.6 mm
Fork offset / rake
38.1 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top